INSTANT BOND WOOD ADHESIVE THICK
 

Titebond Instant Bond is a two-part bonding system that takes between 5 – 15 seconds to set and 30 – 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond Instant Bond Thick viscosity product offers the longest assembly time of 10 seconds and an initial cure speed of 8 seconds. It is ideal for bonding end-grain in a mitre joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.

 

Features & Benefits 

Fast set – Eliminates clamping or reduces clamp time 

Bonds stronger than wood 

Excellent heat and solvent-resistance 

Unaffected by finishes 

Versatile – Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more 

2 year shelf life 

Triple distilled for purity & consistency 

Impact-resistant 

No-clog applicator for easy use and waste reduction 

Ideal for bonding mitre joints on MDF and porous woods

Designed for finish & trim carpentry

High viscosity allows time for positioning parts

MIL Spec (A46050C) Type II, Class 2 

 

Application Guidelines 

Application Temperature: 

Above 50°F (10°C) 

Cure Speed: 

10 second handling, 8 second set, 30 second cure. *Full cure in 8 hours. 

Service Temperature Range: 

-65°F to 200°F 

Clean up: 

Use acetone. Follow solvent vendor’s precautions. 

Limitations: 

Titebond Instant Bond Gel Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F.  

 

KEEP FROM FREEZING.