Titebond III Ultimate Wood Glue 473ml | 16oz Bottle 1414

 

Titebond III Ultimate Wood Glue 473ml | 16oz Bottle 1414

Titebond III Ultimate Wood Glue is the first one-part, water clean up wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is solvent free and cleans up with water – safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues – ideal for both interior and exterior applications. 

Features & Benefits 

Passes ANSI/HPVA Type I water-resistance 

Waterproof formula that cleans up with water 

Superior strength – Strong initial tack 

Designed for interior and exterior applications  

Longer open assembly time  

Lower application temperature 

Unaffected by finishes 

FDA-compliant for indirect food contact 

Application Guidelines 

Application Temperature: 

Above 47°F 

Open Assembly Time: 

8-10 minutes (70°F./50%RH) 

Total Assembly Time: 

20-25 minutes (70°F./50%RH) 

Minimum Required Spread : 

Approximately 6 mils or 250 square feet per gallon 

Required Clamping Pressure: 

Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) 

Method of Application: 

Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. 

Clean up: 

Damp cloth while glue is wet. Scrape off and sand dried excess. 

Limitations: 

Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline.

Not for structural or load bearing applications.

Use when temperature, glue and materials are above 45°F. Store product below 75°F.

Storage above this temperature may cause product to thicken and reduce the usable shelf life.

If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form.

Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern.

Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. 

  

KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.