LIQUI MOLY Motor Protect Engine Oil Additive 500ml 1018

 

LIQUI MOLY Motor Protect Engine Oil Additive 500ml 1018 

 

Motor Protect is a modern additive that works entirely without solid lubricants. It is a chemical high-pressure wear protection additive.

Such additives build up a very thin layer on the sliding points in the engine, which is deformable and slippery under wear conditions.  

The sliding points can be imagined as a landscape of mountains and valleys. When their peaks meet, they weld together due to the temperature and pressures in the engine and then break loose again.

The Motor Protect form’s chemical reaction layers. These reaction layers have a very high load-bearing capacity. They prevent so-called “seizing” and reduce wear.

Seizure would cause lasting damage to the metal surfaces.  

 

What sets Motor Protect apart 

• Enhances smooth running 

• Maximum thermal stability 

• Highly cost-effective 

• With long-term effect 

• Minimizes friction and wear 

• Lowers oil and fuel consumption 

• Tested for use with turbochargers and catalytic converters 

 

Using Motor Protect correctly 

For maximum effectiveness, the wear protection additive must be added when changing the oil. 500ml are sufficient for up to 5 Liters of motor oil.

However, it must be noted that the specified oil filling quantity is reduced by 500ml. The additive is compatible with all commercially available mineral and synthetic motor oils. 

The addition of low-friction, fully synthetic low-viscosity oils further reduces wear by around 35 percent. And with a long-term effect for 50,000 kilometres. 

 

Other inform­a­tion 

Not suitable for use on motorbikes with wet clutches!