Proxxon MICROMOT mains adapter NG 2/E 28707

MICROMOT mains adapter NG 2/E

NORYL casing (heat resistant - a necessity for transformer enclosures).

Polarised socket for MICROMOT plug.
Red LED indicates readiness for use.
PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart).
After cooling down the mains plug should be disconnected briefly to reset the adapter.
With holes for storing bits.
Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

Note:
Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification.
The current drawn is measured, not the power consumption with a hot motor just before stalling.
In practice, this condition seldom appears, if ever.
All PROXXON mains adapters are suitably dimensioned for the recommended purposes.

THE TOOLS AND THE MILL DRILL ARE NOT INCLUDED IN THE SALE.

Suitable machines:
Mill/drill unit MICROMOT 50
Mill/drill unit MICROMOT 50/E
Mill/drill unit MICROMOT 50/EF
Pensander PS 13
Jig saw STS 12/E
Precison drill/grinder FBS 12/EF
MICRO screwdriver MIS 1
Engraving tool GG 12
Hot wire cutter THERMOCUT 12/E
Soldering iron LG 12

Technical data:
220 - 240V.
Supplies 2A at 16 Volt open circuit and 12 Volt under load.
Weight 1,000g.
Class 2 insulation.

NO 28 707 for 220 - 240V