8MM X 40TPI HSS WATCHMAKERS LATHE DRAWBAR TAP HSS-GT GRADE USED TO CLEAN / CUT THREADS IN LATHE DRAWBAR DRAWBAR NOT INCLUDED IN THIS SALE HSS SPLIT DIES ALSO AVAILABLE More... |
 |
.275 x 40 tpi hss split die (BOLEY ETC) .275 X 40TPI SPLIT DIE HSS GRADE PICTURE IS OF 8MM BOLEY COLLET COLLET IS NOT INCLUDED VERY HARD TO FIND THESE DAYS AT THESE PRICES USED TO CLEAN 40TPI COLLET THREADS SPLIT DIE SO WILL ALLOW ADJUSTMENT TO CUTTING OF THREAD SO BY ADJUSTING SPLIT DIE ALMOST ALL 8MM COLLETS CAN BE CLEANED LIMITED AMOUNT AVAILABLE AT THIS PRICE More... |
|
ADAPTOR FOR BCA JIG BORER / SIGMA ADAPTOR FOR BCA JIG BORER / SIGMA 11MM DIAMETER THREADED 14MM X 1 PITCH DRAWBAR THREAD STANDARD WITH THIS ADAPTOR AND USING THREADED STEEL BLANKS ANY ATTACHMENT CAN BE MADE FOR YOUR BCA JIG BORER |
|
BORING HEAD FOR BCA JIG BORER BORING HEAD FOR BCA JIG BORER ONLY 35MM HEAD DIAMETER IMPERIAL GRADUATIONS 0.001 A TOP QUALITY PRODUCT ALSO FITS THE SIGMA |
|
3MM SHANK PROFILE TOOL SET (HSS STEEL) WATCHMAKERS LATHE HSS PROFILE TOOLS 3MM / 1/8" SQUARE SHANK 80MM LONG IDEAL FOR LATHES SUCH AS BOLEY LORCH ECT THIS SIZE ONLY FROM RDGTOOLS |
|
45MM 4 JAW CHUCK ON A 0 MORSE TAPER A 45MM 4 JAW LATHE CHUCK ON A 0 MORSE TAPER THIS IS DESIGNED TO GO INTO A HEAD / TAILSTOCK OF A WATCHMAKING LATHE THE O MORSE TAPER ARBOUR HAS A STANDARD M12 X 1 INTERNAL THREAD |
|
45MM 4 JAW CHUCK ON A 1 MORSE TAPER A 45MM 4 JAW LATHE CHUCK ON A 1 MORSE TAPER THIS IS DESIGNED TO GO INTO A HEAD / TAILSTOCK OF A WATCHMAKING LATHE THE 1 MORSE TAPER ARBOUR HAS A STANDARD M12 X 1 INTERNAL THREAD |
|
2" / 50MM 3 JAW CHUCK ON A 0 MORSE TAPER A 2" SELF CENTREING 3 JAW CHUCK ON A O MORSE TAPER, THIS IS DESIGNED TO GO INTO A HEAD / TAILSTOCK OF A WATCHMAKING LATHE THE O MORSE TAPER ARBOUR HAS A STANDARD M12 X 1 INTERNAL THREAD |
|
2" / 50MM 3 JAW CHUCK ON A 1 MORSE TAPER A 2" SELF CENTREING 3 JAW CHUCK ON A 1 MORSE TAPER, THIS IS DESIGNED TO GO INTO A HEAD / TAILSTOCK OF A WATCHMAKING LATHE THE 1 MORSE TAPER ARBOUR HAS A STANDARD M12 X 1 INTERNAL THREAD |
|
BORING HEAD FOR EMCO LATHES ( MODELS 3 & 4) MODELS 3 & 4 THREAD BACK FITS ON EITHER HEADSTOCK OR TAILSTOCK ONLY 35MM DIAMETER THREADED 14MM X 1 PLEASE CHECK YOUR LATHE TAKES 5/16" BORING BARS ONE INCLUDED NOW BORING IS POSSIBLE ON YOUR EMCO |
|
35MM DIAMETER BORING HEAD ON A 0MT SHANK HMB SMALL BORING HEAD NEW LINE TO RDGTOOLS 0MT TAPER HEAD ONLY 35MM DIAMETER IMPERIAL GRADUATIONS TAKES 5/16" BORINGBARS THREADED FOR DRAWBAR INTERCHANGABLE 3MTAND 2MT SHANKS AVAILABLE CLICK HERE FOR LARGER PICTURE |
|
1MT WATCHMAKERS REVOLVING CENTRE 1 MORSE TAPER FITS MANY SMALL LATHES ONLY AVAILABLE FROM RDGTOOLS RUNOUT UNDER 5 MICRONS CENTRE DIAMETER ONLY 15/16" COLLET IS THREADED 12M X 1 SO CAN BE USED WITH OTHER ATTACHMENTS EMCO ECT QUALITY GROUND FINISH |
|
0 MT WATCHMAKERS REVOLVING CENTRE 0 MORSE TAPER FITS MANY SMALL LATHES ONLY AVAILABLE FROM RDGTOOLS RUNOUT UNDER 5 MICRONS CENTRE DIAMETER ONLY 15/16" COLLET IS THREADED 12M X 1 SO CAN BE USED WITH OTHER ATTACHMENTS EMCO ECT QUALITY GROUND FINISH |
|
|
|
SMALL TOOLPOST FOR UNIMAT LATHE SMALL TOOLPOST FOR UNIMAT LATHE SIZE 23MM X 23MM SQUARE AND 34MM HIGH UNIT COULD BE USED ON OTHER SMALL LATHES |
|
0-1/4" JACOBS DRILL CHUCK (SHORT 1MT TAPER) THIS IS A NEW JACOBS DRILL CHUCK 0-1/4" CAPPACITY UNIT HAS A SHORT 1MT ARBOUR WITH DRAW BAR THREAD IN BACK DESIGNED FOR SHERLINE MACHINE BUT CAN BE USED ON MANY WATCHMAKING MACHINES |
|
PROFILE LATHE TOOLS (ROUND TIP) 6MM SHANKOUT OF STOCK Ref: HUYTY98
Price: £13.57 (£15.94 Including VAT at 17.5%)
Top Quality profiling tool. Complete with 2 tips. These tools are excellent and come complete with inserts and torx key, these tips are very hard wareing due to being able to turn round creating many new cutting edges.. SHANK SIZE 6MM these tips are readly available from us NOW REDUCED IN PRICE |
|
jewelery / watchmakers hand held vice jewelery / watchmakers hand held vice complete with 2 interchangeable collets ideal for craft workers used to hold small drills / gravers / cutters etc More... |
|
SMALL TURNING TOOLS 6MM SHANK (SCLCR) this top quality indexable turning tool comes complete with indexable tip and torx key,takes tha excellent CCMT-06-02-04 tip, these tools provide a excellent finish to your work when turning and facing, this tool is 6mm shank perfect for small lathes |
|
SMALL BORING BAR 6MM SHANK (SCLCR) This top quality boring bars come complete with indexable tip and torx key, It take's the ccmt-06-02-04 indexable tip . this tool will provide excellent finish in all boring operations, this bar has a 6mm shank |
|
|
|
CARBIDE BORING BAR SET 5/16" SHANK 8PC A NEW SET OF 8 BORING TOOLS FOR USE IN A BORING HEAD, ALL HAVE BRAZED ON CARBIDE TIPS, TOOLS ARE ALL DIFFERENT LENGTHS, THIS 8PC SET IS FOR THE 35MM BORING HEAD, BUT WILL FIT OTHER WITH A 5/16" BORE <More...> |
|
38 PIECE SET OF BRAZED TUNGSTEN CARBIDE LATHE TOOLS 1/4" SHANK THE 38 PIECE SET COMPRISES ALL 1/4" X 1/4" SHANK (PERFECT FOR ALL THOSE SMALLER MACHINES) 4 X SQUARE END, 6 X FINISHING, 4 X ROUGHING, 8 X LEFT HAND, 8 X RIGHT HAND, 4 X STYLE B LEFT HAND, 4 X STYLE B RIGHT HAND THESE ARE TIPPED WITH TUNGSTEN CARBIDE, PERFECT FOR ALL MATERIALS click here for more info> |
|
RDG TINY LATHE PARTING OFF TOOL 8MM X 8MM PERFECT FOR SMALL MACHINE'S SHANK ONLY 8MM X 8MM |
|
BS1 CENTRE DRILL (1/8" DIAMETER) Centre drills are designed with spiral flutes to give long tool life and high quality to the centre holes where accurate centering is essential in certain operations. Available in 4 different sizes. |
|
|
|
|
|
 |
|
