TOOL STEEL /HIGH SPEED STEEL TOOLS

NEW PRO LATHE PARTING SYSTEM (12MM SHANK)

A NEW PROFESSIONAL LATHE PARTING SYSTEM,VERY RIGID CONSTRUCTION AND EASY TO OPERATE, THIS IS THE SAME CONSTRUCTION AS INDEXABLE SYSTEM SOLD BY SANDVIK BUT INCORPORATING A HSS BLADE INSTEAD OF A INDEXABLE PARTING TIP,SO LESS EXPENSIVE TO OPERATE, ON SMALL-MEDIUM LATHE THE SANDVIK HOLDER WOULD NOT FIT BECAUSE THE SUPPORT WAS TO THICK TO FIT IN THERE TOOL POSTS,THIS ONE IS ONLY 1/2" WIDE SO WILL FIT MOST LATHES, BLADE SLIDES VERY EASILY BY LOOSENING 3 SCREW ON TOP,BLADE CLAMPING FORCE IS EXCELENT,UNIT ( NOT BLADE ( IS 3 3/8" LONG, AND 1 3/4" HIGH,BLADE IS 1" WIDE AND 6" LONG, THIS UNIT IS MADE FOR LATHE WITH A MIN CENTRE HEIGHT OF 4 1/2",SUCH AS BOXFORD,STUDANT,M300 ECT, ,WILL FIT MYFORD AND WILL FIT IN TOOLPOST,BUT YOU WILL HAVE REDUCE END OF BLADE, I USE THIS SYSTEM ON MY LATHE, QUALITY MADE ( GAURANTEED ), YOU WONT BE DISSAPOINTED WITH THIS SYSTEM.EXTRA BLADES ARE ALWAYS AVAILABLE

3MM SHANK PROFILE TOOL SET (HSS STEEL)

WACHMAKERS LATHE HSS PROFILE TOOLS

3MM / 1/8" SQUARE SHANK

80MM LONG

IDEAL FOR LATHES SUCH AS BOLEY LORCH ECT

THIS SIZE ONLY FROM RDGTOOLS

6MM HSS PROFILE TURNING TOOLS ( SET OF 8 )

SET OF EIGHT LATHE TURNING TOOLS, ALL HIGH SPEED STEEL. SHANK 6MM X 6MM, SET CONTAINS ONE EACH OF LEFT AND RIGHT TURNING AND FACING, STRAIGHT FINISHING, CORNER TOOL, PARTING TOOL, BORING TOOL, THREADING TOOL AND CORNER FINISHING TOOL., COMES IN A VINYL WALLET,

8MM HSS PROFILE TURNING TOOLS ( SET OF 8 )

SET OF EIGHT LATHE TURNING TOOLS, ALL HIGH SPEED STEEL. SHANK 8MM X 8MM, SET CONTAINS ONE EACH OF LEFT AND RIGHT TURNING AND FACING, STRAIGHT FINISHING, CORNER TOOL, PARTING TOOL, BORING TOOL, THREADING TOOL AND CORNER FINISHING TOOL., COMES IN A VINYL WALLET,

10MM HSS PROFILE TURNING TOOLS ( SET OF 8 )

SET OF EIGHT LATHE TURNING TOOLS, ALL HIGH SPEED STEEL. SHANK 10MM X 10MM, SET CONTAINS ONE EACH OF LEFT AND RIGHT TURNING AND FACING, STRAIGHT FINISHING, CORNER TOOL, PARTING TOOL, BORING TOOL, THREADING TOOL AND CORNER FINISHING TOOL., COMES IN A VINYL WALLET,

12MM HSS PROFILE TURNING TOOLS ( SET OF 8 )

SET OF EIGHT LATHE TURNING TOOLS, ALL HIGH SPEED STEEL. SHANK 12MM X 12MM, SET CONTAINS ONE EACH OF LEFT AND RIGHT TURNING AND FACING, STRAIGHT FINISHING, CORNER TOOL, PARTING TOOL, BORING TOOL, THREADING TOOL AND CORNER FINISHING TOOL., COMES IN A VINYL WALLET,

SET OF 3 TURNING TOOLS (HSS) 8MM SHANK

SET OF 3 TURNING TOOLS

ALL 8MM SHANK

ALL TAKE 1/8" TOOL STEEL

PERFECT FOR SMALL LATHES

CLICK HERE FOR LARGER PICTURE

RDG TINY LATHE PARTING OFF TOOL 8MM X 8MM

PERFECT FOR SMALL MACHINE'S

SHANK ONLY 8MM X 8MM

PARTING SYSTEMS FOR SMALL LATHES

PARTING SYSTEMS FOR SMALL LATHES, ITEM SHOWN FITTED IN A MYFORD QUICKCHANGE HOLDER, TAKES A STANDARD 5/16" BLADE AND IS ONLY 1/8" THICK, GOOD FOR SMALL WORK/BUT WILL ALSO DO LARGER WORK, THIS UNIT IS NEW AND UNUSED, AND COMES WITH A NEW BLADE (QUICKCHANGE HOLDER NOT INCLUDED)

BARGAIN PRICE OF ONLY £8.09 + VAT

SMALL PRO PARTING SYSTEM (9MM SHANK)

SMALL PRO PARTING SYSTEM

BLADE IS 3/32" X 1/2" X 4"

HOLDER IS 55MM LONG / 28MM HIGH / 25MM THICK

SHANK 9MM

CLAMPING FORCE IS EXCELENT

IDEAL SYSTEM FOR A MYFORD LATHE

MORE DETAILS..........>

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

24MM HIGH X 6" LONG

4 X DOUBLE ENDED BORING BARS

DIAMETERS OF BORING BARS: 1/2",3/8" 1/4" AND 3/16"

LENGTHS ARE 5" AND 6" LONG

BARS HAVE SECURING SCREW FOR TOOL STEEL

3 LENGTHS OF TOOL STEEL,ENOUGH TO TIP ALL 8 ENDS

IDEAL FOR SMALL LATHES

3 MORSE TAPER FLY CUTTER

3 MORSE TAPER FLY CUTTER, NEW AND UNUSED, TAKES UPTO 3/8" TOOL STEEL, HEAD DIAMETER 38X49MM, QUALITY ITEM, PLEASE SEE PICTURES, THREADED SHANK FOR DRAWBAR, USED IN MILLING MACHINES

2MT FLY CUTTER

TAKES UPTO 1/4" TOOL STEEL,

HEAD DIAMETER 1- 1/2",

THREADED SHANK FOR DRAWBAR

USED IN MILLING MACHINES AND LATHES

IDEAL SIZE AND TAPER FOR MYFORD

LATHE HEADSTOCK .

R8 TAPER FLY CUTTER

TAKES UPTO 3/8" TOOL STEEL,

HEAD DIAMETER 2- 1/2",

THREADED SHANK FOR DRAWBAR

7/16" UNF

SQUARE TOOL STEEL 1/8" X 2 1/2" LONG (BLANK END)

1/8" X 2 1/2" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

SQUARE TOOL STEEL 3/16" X 2 1/2" LONG (BLANK END)

3/16" X 2 1/2" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

SQUARE TOOL STEEL 1/8" X 4" LONG (BLANK END)

1/8" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

SQUARE TOOL STEEL 5/16" X 4" LONG (BLANK END)

5/16" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

SQUARE TOOL STEEL 1/4" X 4" LONG (BLANK END)

1/4" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

ROUND TOOL STEEL 3/16" X 4" LONG (BLANK END)

3/16" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

ROUND TOOL STEEL 5/16" X 4" LONG (BLANK END)

5/16" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

24MM HIGH X 6" LONG

3/32 X 5/8 X 5" PARTING BLADE (fits our myford rear parting)

3/32" X 5/8" X 5" PARTING BLADE

THIS PARTING BLADE FITS THE REAR PARTING SYSTEM FOR MYFORD LATHE'S

3/32 X 1/2 X 4" LONG PARTING BLADE

3/32 X 1/2 X 4" PARTING BLADE

1/8 X 3/4 X 6" LONG PARTING BLADE

1/8 X 3/4 X 6" PARTING BLADE

3 MORSE TAPER FLY CUTTER

3 MORSE TAPER FLY CUTTER, NEW AND UNUSED, TAKES UPTO 3/8" TOOL STEEL, HEAD DIAMETER 38X49MM, QUALITY ITEM, PLEASE SEE PICTURES, THREADED SHANK FOR DRAWBAR, USED IN MILLING MACHINES

R8 TAPER FLY CUTTER

TAKES UPTO 3/8" TOOL STEEL,

HEAD DIAMETER 2- 1/2",

THREADED SHANK FOR DRAWBAR

7/16" UNF

3PC FLY CUTTER SET WITH HSS TOOL STEEL 1/2" SHANK

3PC FLY CUTTER SET

1/2" SHANK

INCLUDES THE 3 PIECE OF TOOLSTEEL

IDEAL FOR FLY CUTTING ON A LATHE OR MILLING MACHINE