|
 |
3MT REVOLVING BACKPLATE 100MM DIA 3MT REVOLVING BACKPLATE 100MM DIA THESE ARE USED TO MOUNT 3 AND 4 JAW CHUCKS SO THEY CAN BE MOUNTED IN THE TAILSTOCK TO ALLOW MACHINING OF TUBE ON THE LATHE SIMPLY RECESS THE BACKPLATE AND ATTACH THE CHUCK AS YOU WOULD TO FIT THE HEADSTOCK OF THE LATHE More... |
|
3MT REVOLVING TUBE CENTRE 64-100MM A 3MT REVOLVING TUBE CENTRE CAPPACITY 64 - 100MM THESE CENTRES ARE USED WHEN YOU NEED TO SPIN LARGE DIA OF PIPE OF HOLLOW WORK THE HEAD REVOLVES CLICK HERE FOR A LARGER PICTURE |
|
3MT REVOLVING TUBE CENTRE 38-75MM A 3MT REVOLVING TUBE CENTRE CAPPACITY 38-75MM THESE CENTRES ARE USED WHEN YOU NEED TO SPIN LARGE DIA OF PIPE OF HOLLOW WORK THE HEAD REVOLVES CLICK HERE FOR A LARGER PICTURE |
|
3MT REVOLVING CENTRE REVOLVING CENTRE ON A THREE MORSE , 60 DEGREE CENTRE HAS A MAXIMUM DIAMETER OF 18mm. THIS IS A NICE CENTRE, |
|
4MT REVOLVING CENTRE REVOLVING CENTRE ON A FOUR MORSE , 60 DEGREE CENTRE . THIS IS A NICE CENTRE, |
|
2MT REVOLVING BACKPLATE 100MM DIA 2MT REVOLVING BACKPLATE 100MM DIA THESE ARE USED TO MOUNT 3 AND 4 JAW CHUCKS SO THEY CAN BE MOUNTED IN THE TAILSTOCK TO ALLOW MACHINING OF TUBE ON THE LATHE SIMPLY RECESS THE BACKPLATE AND ATTACH THE CHUCK AS YOU WOULD TO FIT THE HEADSTOCK OF THE LATHE More... |
|
2 MORSE TAPER LIVE CENTRE WITH INTERCHANGEABLE TIPS OUT OF STOCK Ref: 12605AB
Price: £38.30 (£44.05 Including VAT at 15%)
2 MORSE TAPER LIVE CENTRE WITH INTERCHANGEABLE TIPS. BODY IS 132mm LONG, 40mm MAXIMUM DIAMETER, COMES WITH SEVEN TIPS (ONE 60 DEGREE FEMALE, ONE 90 DEGREE CENTRE FOR PIPE WORK AND FIVE 60 DEGREE MALE CENTRES (MAXIMUM DIAMETERS ARE 5.5mm, 7mm, 9mm AND 13.3mm)). THIS IS A QUALITY CENTRE SET, BODY AND TIPS ARE PRECISION GROUND AND HARDENED, COMES IN A WOODEN CASE WITH A DRIFT KEY,
|
|
2 MORSE TAPER REVOLVING CENTRE REVOLVING CENTRE ON A TWO MORSE. LENGTH 136mm, 60 DEGREE CENTRE HAS A MAXIMUM DIAMETER OF 18mm. THIS IS A NICE CENTRE
|
|
2MT REVOLVING TUBE CENTRE 26-50MM A 3MT REVOLVING TUBE CENTRE CAPPACITY 26-50MM THESE CENTRES ARE USED WHEN YOU NEED TO SPIN LARGE DIA OF PIPE OF HOLLOW WORK THE HEAD REVOLVES CLICK HERE FOR A LARGER PICTURE |
|
2MT TRIPLE BEARING REVOLVING CENTRE 2MT TRIPLE BEARING REVOLVING CENTRE THESE ARE DESIGNED FOR HEAVY USE A QUALITY CENTRE |
|
1MT WATCHMAKERS REVOLVING CENTRE 1 MORSE TAPER FITS MANY SMALL LATHES ONLY AVAILABLE FROM RDGTOOLS RUNOUT UNDER 5 MICRONS CENTRE DIAMETER ONLY 15/16" COLLET IS THREADED 12M X 1 SO CAN BE USED WITH OTHER ATTACHMENTS EMCO ECT QUALITY GROUND FINISH |
|
0 MT WATCHMAKERS REVOLVING CENTRE 0 MORSE TAPER FITS MANY SMALL LATHES ONLY AVAILABLE FROM RDGTOOLS RUNOUT UNDER 5 MICRONS CENTRE DIAMETER ONLY 15/16" COLLET IS THREADED 12M X 1 SO CAN BE USED WITH OTHER ATTACHMENTS EMCO ECT QUALITY GROUND FINISH |
|
