New Lines To RDG Tools

RDG Tools Catalogue » New Lines To RDG Tools

LED Adjustable Magnifying Lamp
Ref: 2879

LED ADJUSTABLE MAGNIFYING LAMP
90 LED LIGHT POWER
POWERFUL OPTICALLY GROUND 3-DIOPTOR
MAGNIFYING GLASS
BRINGS SMALL WORK UP CLOSE
VERSATILE FLEXIBLE ARM EXTENDS UP TO 40"
FULLY ADJUSABLE TO ANY POSITION
WITH STEEL SPRINGS AND TENSION CONTROL
MILTI-USE CLAMP MOUNTS ON TABLE OR BENCH
GIVES EXCELLENT MAGNIFIED LIGHTING AND
HAND FREE USE FOR HOBBIES,CLOSE INSPECTION
MODEL MAKING ECT
240VOLTS ( STANDARD 3-PIN PLUG )

More...

Price: £38.30
Free UK Mainland Postage
(£45.96 Including VAT at 20%)

Large Traditional Tool Chest
Ref: 8509778

Large Traditional Tool Chest
Constructed in Solid Hard wood
Lockable front panels with 2 keys
Chest Size is 490mm x 255mm x 385mm
The 6 upper drawers are 205mm x 185mm x 25mm
the 2 lower drawers are 460mm 185mm x 45mm
the top storage area is 460mm x 230mm x 60mm
Hardwood construction with tongue and Groove drawers
Green felt lined interior
Quality Brass Hinges and corner protectors

More...

Price: £104.17
Free UK Mainland Postage
(£125.00 Including VAT at 20%)

100mm / 4" LCD Display Digital Vernier Caliper
Ref: 27898

100mm / 4" LCD Display Digital Vernier Caliper
Imperial/Metric conversion
Resolution 0.01mm
Stainless steel body
More...

Price: £12.08
Free UK Mainland Postage
(£14.50 Including VAT at 20%)

MAGNETIC HALOGEN MACHINE LIGHT
Ref: 2438
FLEXABLE MAGNETIC HALOGEN MACHINE LIGHT
( GOOSE NECK )
MAGNETIC BASE WILL STICK TO ANY
STEEL FLAT SURFACE 80 KG FORCE
CE APPROVED
240 VOLTS
24VOLT-25WATT TRANSFORMER
ON /OFF SWITCH
FLEXABLE STEM LOCKS IN ALL
POSITIONS
IDEAL FOR SMALL LATHE / MILL
OR GENERAL CRAFT WORK
STEEL SURFACE PLATE NOT INCLUDED

click here for a larger picture.......>

Price: £32.92
Free UK Mainland Postage
(£39.50 Including VAT at 20%)

Rear Indexable Parting System for Boford Lathe
Ref: 2350

Only the Parting holder included "NOT THE LATHE IN PICTURE"

Rear Indexable Parting System for the Boxford Lathe
included parting block and blade and 1 insert
This is a quality tool only available from RDGTools
Fits AUD/BUD/CUD/TUD ETC machines with a Tee-slotted Cross slide
Please take a look at this parting tool being used on youtube.com "click here"

More...

Price: £49.58
Free UK Mainland Postage
(£59.50 Including VAT at 20%)

Small Milling Vertical Slide for Emco or Mini lathes
Ref: 27896

Small Milling Vertical Slide for Emco or Mini lathes
quality made vice only for rdgtools
could be fitted to almost any small lathe
the dimensions are :
slide table 90mm x 50mm 2 t slots
cast base 55mm x 50mm with 2 removable tee nuts
total height is 140mm (with brass handle)
dial is graduated 0 - 50
graduated imperial
unit is all cast steel construction
no other small vertical slide is this quality or price
a lovely smooth action
More...

Price: £49.58
Free UK Mainland Postage
(£59.50 Including VAT at 20%)

Rear Indexable Parting System for Colchester Bantam Lathe
Ref: 843984

Rear Indexable Parting System for Colchester Bantam Lathe
Tee slotted base is included so can be used to hold other work are attachments
Also parting block and blade and 1 insert
This is a quality tool only available from RDGTools
Fits bantam 800 and 1600 machines
Please take a look at this parting tool being used on youtube.com "click here"
More...

Price: £49.58
Free UK Mainland Postage
(£59.50 Including VAT at 20%)

Drill Stand (British Design) 1/16" - 1/2"
Ref: 6778698

Drill Stand, 1/16" - 1/2"
Die Cast Aluminium 5" /125mm diameter
More...

Price: £12.08
Free UK Mainland Postage
(£14.50 Including VAT at 20%)

2-POINT STEADY FOR MYFORD ML7 / SUPER 7 LATHE
Ref: 2335

2-POINT STEADY FOR MYFORD ML7 / SUPER 7 LATHE. (NOT ML10)
CLICK HERE FOR A LARGER PICTURE

Price: £16.63
Free UK Mainland Postage
(£19.96 Including VAT at 20%)

New 35MM Boring Head 1/2" straight Shank
Ref: 2334
New 35MM Boring Head
1/2" straight Shank
TAKES 5/16" BORING BARS

Price: £36.50
Free UK Mainland Postage
(£43.80 Including VAT at 20%)

BORING HEAD FOR EMCO LATHES ( MODELS 3 & 4)
Ref: 2332

MODELS 3 & 4
THREAD BACK FITS ON EITHER
HEADSTOCK OR TAILSTOCK
ONLY 35MM DIAMETER
THREADED 14MM X 1
PLEASE CHECK YOUR LATHE
TAKES 5/16" BORING BARS
ONE INCLUDED
NOW BORING IS POSSIBLE ON YOUR EMCO

Price: £32.92
Free UK Mainland Postage
(£39.50 Including VAT at 20%)

TILTING ANGLEPLATE (5" X 4") 3 TEE SLOTS
Ref: 2340

Swivel Angle Plate (5" X 4") (Eclipse Type)
3 Tslots
Close grain Cast-Iron
Graduated 0-90 degrees

<More...>

Price: £40.83
Free UK Mainland Postage
(£49.00 Including VAT at 20%)

Mini Lathe Boring & Screw cutting Set
Ref: 2328

Mini Lathe Boring & Screw cutting Set
Ideal for small lathes
1 x 6mm boring bar 95mm long
1 x 6mm screwcutting bar 6mm dia 95mm long 55 degree
1 x 6mm screwcutting bar 6mm dia 95mm long 60 degree
More...

Price: £16.92
Free UK Mainland Postage
(£20.30 Including VAT at 20%)

14mm x 1 Rotary Table Adaptor
Ref: 0595

14mm x 1 Rotary Table Adaptor
made for our 3 slot Rotary tables with 2mt centre,
Plate is 80mm diameter with 3 mounting holes
3 t nuts also are supplied
Threaded 14mm x 1 to take Emco Chucks and fittings
The rear of the plate has a tapered fitting (not morse taper) to centre

More...

Price: £11.25
Free UK Mainland Postage
(£13.50 Including VAT at 20%)

Ring Shank Stamping Anvil "double sided"
Ref: 8947543

Ring Shank Stamping Anvil
Solid Bronze Block
Used in conjuction with Carat Punches
Designed to hold the ring shank in place for perfect stamping
Double sided Bronze Anvil
side one 6 wide band settings 4-10mm
side two 9 slimline settings 2mm-5mm
More...

Price: £16.25
Free UK Mainland Postage
(£19.50 Including VAT at 20%)

Jewellers Swage Grooved Forming Block "Dapping tool"
Ref: 2312

Jewellers Swage Grooved Forming Block "Dapping tool"
Latest Design
62mm x 62mm x 50mm
20 shapes (vee radius and square)
Hardened and ground

More...

Price: £18.33
Free UK Mainland Postage
(£22.00 Including VAT at 20%)

6 PIECE LONG SERIES COUNTERSINK SET (6.3MM - 20.5MM) HSS
Ref: 135992
6 PIECE COUNTERSINK SET (6.3MM - 20.5MM)
LONG SERIES ALL HAVE A 80-90MM SHANK
ALL HIGH SPEED STEEL,
SIZES 6.3MM, 8.3MM, 10.4MM, 12.4MM, 16.5MM, 20.5MM,
ALL 90* DEGREES
COMPLETE IF FITTED WOODEN BOX

Price: £24.50
Free UK Mainland Postage
(£29.40 Including VAT at 20%)

20mm Parting Block to take the Indexable Parting Blades
Ref: 35454

20mm Shank Parting Block to take the Indexable Parting Blades
Will take standard indexable parting blades 26mm high
a quality tool

More...

Price: £24.50
Free UK Mainland Postage
(£29.40 Including VAT at 20%)

10 1/2" FACEPLATE D1-4 FITTING
Ref: 2279

10 1/2" FACEPLATE D1-4 FITTING (ALSO KNOWN AS D4 FITTING)
TO FIT MACHINES SUCH AS HARRISON M300, COLCHESTER STUDENT/ MASTER
UNIT HAS 8 X 12MM X 60 SLOTS
CAMLOCK PIN DIAMETER 16MM
THIS UNIT INCLUDES THE PINS AND FIXING SCREWS

More...

Price: £65.83
Free UK Mainland Postage
(£79.00 Including VAT at 20%)

80mm Face Mill 27mm bore (5 Tips) 90 degrees
Ref: 2276

80mm dia Face Mill
Unit takes standard TPUN 1603 Carbide Inserts
Each Tip has 3 cutting edges, This facemill will cut upto a 90 degrees shoulder
27mm bore

More...

Price: £53.64
Free UK Mainland Postage
(£64.37 Including VAT at 20%)

3 POINT STEADY FOR MYFORD LATHE (FIXED STEADY)
Ref: 85585

3-POINT STEADY FOR MYFORD LATHE ( ML7 AND SUPER 7 )
A NEW REVISED CASTING
CLICK HERE FOR A LARGER PICTURE

Price: £31.45
Free UK Mainland Postage
(£37.74 Including VAT at 20%)

1MM-7MM RADIUS GAUGE SET
Ref: 2274

A LARGE RADIUS GAUGE SET
COVER BETWEEN 1MM - 7MM

Price: £5.79
Free UK Mainland Postage
(£6.95 Including VAT at 20%)

14mm X 1 Rotary Table Adaptor (Emco Thread)
Ref: 90245

14mm X 1 Rotary Table Adaptor (Emco Thread)
made for our 3 slot rotary tables with a 2mt centre
80mm diameter with 3 mounting holes
3 t nuts supplied
Centre has a Male M14 x 1 Thread for our and Emco Chucks
At the rear is a taper to centralise on a rotary table,(Can be turned off if adaptor is being used in a different way)

Price: £11.25
Free UK Mainland Postage
(£13.50 Including VAT at 20%)

Quickchange Toolpost for Emco Lathes
Ref: 9809

Quickchange Toolpost for Emco Lathes
For Unimat 3, Unimat 4 and Unimat basic lathes
Will clamp 6mm or 8mm Turning tools

More...

Price: £32.50
Free UK Mainland Postage
(£39.00 Including VAT at 20%)

Engineers Bell Punch "Centre find every time"
Ref: 2250

Engineers Bell Punch
Capacity upto 35mm Round bar
Very handy when drilling into round bar

More...

Price: £7.92
Free UK Mainland Postage
(£9.50 Including VAT at 20%)

Boxford 9" Face Plate 1 1/2" x 8tpi
Ref: 1917

Boxford 9" Face Plate 1 1/2" x 8tpi "REDUCED IN PRICE"
Fits Aud Bud Cud Lathes (Standard Boxford Nose thread)
A quality Plate

More...

Price: £29.17
Free UK Mainland Postage
(£35.00 Including VAT at 20%)

ILLUMINATED MAGNIFYING LAMP MAGNIFYER (WITH CLAMP)
Ref: 2222

ILLUMINATED MAGNIFYING LAMP (WITH CLAMP)
3 DIOPTER MAGNIFICATION
SUPPLIED WITH 2 9W TUBES
GLASS LENS 19CM X 16CM
40" REACH EXTENSION ARM
THIS IS A QUALITY MAGNIFIER
THIS MAGNIFING LAMP HAS A CLAMP BASE TO BE FASTENED TO A DESK LIKE IN THE PICTURE
8609
More...

Price: £35.61
Free UK Mainland Postage
(£42.73 Including VAT at 20%)

Mini Lathe Tailstock Die Stock Holder
Ref: 2208

Mini Lathe Tailstock Die Stock Holder
Small Die stock holder for 1" Diameter dies

Price: £15.41
Free UK Mainland Postage
(£18.49 Including VAT at 20%)

5" x 3" x 3" V ANGLE PLATE "T-Slotted" NEW

Ref: 2214

5" x 3" x 3" V ANGLE PLATE
UNIT MEASURES 5" x 3" x 3"
Cast Iron Construction (stress relieved)
multipull clamping points AND 2x 2 slotted slots
Vee groove on the tp
can be used on all 4 sides
A Quality Tool

More...

Price: £27.50
Free UK Mainland Postage
(£33.00 Including VAT at 20%)

ER25 Collet Chuck 2MT + Full Set of 15pc Collets
Ref: 2168

ER25 Collet Chuck 2MT + Full Set of 15pc Collets
Spanner to suit
Range of the collects is 1.5mm to 16mm (and the Imperial equivalent)

This collet set will enable you to hold both straight and threaded cutters along with drill bit etc

More...

Price: £86.67
Free UK Mainland Postage
(£104.00 Including VAT at 20%)

5pc Watchmakers HSS Prolfile Tool Set
Ref: 893403

5pc Watchmakers HSS Prolfile Tool Set
3.5mm x 3.5mm x 60mm long
M2 Hss Toolsteel
set consists of : 1x left hand cutting, 1 x right hand cutting, 1 x parting tool, 1 x knife tool and 1 x screw cutting tool.
More...

Price: £18.75
Free UK Mainland Postage
(£22.50 Including VAT at 20%)

STUARTS MICROMETER ENGINEERS BLUE "TUBE"
Ref: 684581

STUARTS MICROMETER ENGINEERS BLUE
Tube off
USED IN MARKING OUT IN THE WORKSHOP/GARAGE
FOR LOCATING HIGH SPOTS ON STEEL SURFACES IN THE GARAGE WHEN CHECKING VALVE SEATS ETC, SO MANY USES

More...

Price: £4.88
Free UK Mainland Postage
(£5.86 Including VAT at 20%)

SQUARE TOOL STEEL 3/4" X 4" LONG (BLANK END)
Ref: 896912

3/4" X 4" LONG (BLANK END) THIS TOOLSTEEL HAS NO GROUND ENDS SO IS PERFECT FOR MAKING YOUR OWN TOOLS

Sometimes used as parallels as all surfaces are ground and square
Price: £5.05
Free UK Mainland Postage
(£6.06 Including VAT at 20%)

Digital Dial Test Indicator (32mm Extended Travel)
Ref: 7871

Digital Dial Test Indicator
32MM Measuring Range
Large 55mm face
The DTI has both plain and lug backs (spare plate on back swaps over, Both supplied)
Imperial / Metric
A quality Digital Dial Indicator

Price: £45.00
Free UK Mainland Postage
(£54.00 Including VAT at 20%)

Digital Dial Test Indicator
Ref: 7868

Digital Dial Test Indicator
Large 55mm face
The DTI has both plain and lug backs (spare plate on back swaps over, Both supplied)
Imperial / Metric
A quality Digital Dial Indicator

Price: £39.50
Free UK Mainland Postage
(£47.40 Including VAT at 20%)

7pc HD Flexi-drive set / Flexi Right angle set
Ref: 2153

7pc HD Flexi-drive set / Flexi Right angle set
Set coprises of
10mm keyless chuck 90 degree angled Drill Attachment
1200mm heavy duty flexible drive shaft with 10mm keyed drill chuck
150mm hex drive extension with quick release chuck
150mm flexible extension
Magnetic bit holder
Countersink bit
Chuck key all in a fitted aluminium case
This is a heavy duty set not to be confused with the cheap imports
Please click here for larger picture....

Price: £34.50
Free UK Mainland Postage
(£41.40 Including VAT at 20%)

.275 x 40 tpi hss split die (BOLEY ETC)
Ref: 2143

.275 X 40TPI SPLIT DIE
HSS GRADE
PICTURE IS OF 8MM BOLEY COLLET
COLLET IS NOT INCLUDED
VERY HARD TO FIND THESE DAYS
AT THESE PRICES
USED TO CLEAN 40TPI COLLET THREADS
SPLIT DIE SO WILL ALLOW ADJUSTMENT TO CUTTING OF THREAD
SO BY ADJUSTING SPLIT DIE ALMOST ALL 8MM COLLETS CAN BE CLEANED
LIMITED AMOUNT AVAILABLE AT THIS PRICE

More...

Price: £8.75
Free UK Mainland Postage
(£10.50 Including VAT at 20%)

SET OF ER25 COLLETS (15 PIECE)
Ref: 2143776
A FULL SET OF ER25 COLLETS, 15 COLLETS IN THE SET, WILL HOLD WORK FROM 1.5MM TO 16MM.
THESE COLLETS WILL HOLD STRAIGHT SHANK AND THREADED SHANK END/SLOT MILL'S

A QUALITY SET
<More...>

Price: £57.92
Free UK Mainland Postage
(£69.50 Including VAT at 20%)

10 X ZURCONIUM FLAP DISCS FOR ANGLES GRINDERS 4 1/2" / 120 GRIT
Ref: 2142

10 X ZURCONIUM FLAP DISCS 120 GRIT
4 1/2" / 115MM DIAMETER
22MM BORE
THIS FLAP DISC WILL SUIT ALL METAL GRINDING USES

Price: £9.58
Free UK Mainland Postage
(£11.50 Including VAT at 20%)

BALL TURNING ATTACHMENT FOR MYFORD LATHE
Ref: 1301

FIT STRAIGHT ON CROSSLIDE FOR QUICK
WILL TURN UPTO A 32MM DIAMETER BALL
TURNING OF BALLS & CONES
1 INDEXABLE TIP WITH 3 CUTTING EDGES
PRESET CENTRE HIGHT FOR MYFORD LATHES
HEAD ADJUSTABLE FOR VARIOUS SIZE BALLS.
THIS ATTACHMENT CAN BE USED ON LARGER MACHINES
BUT PACKING WILL BE NEEDED TO BRING UP TO LARGER CENTRE HIGHT
TO HELP YOU SEE THE POSSIBLE USES OF THIS
ATTACHMENT THERE ARE 2 SIMILAR ATTACHMENTS ON "YOUTUBE"
THE ONLY DIFFERENCE IS THAT OUR MODEL USES A DIFFERENT
INDEXABLE TIP,AND IS PRESET FOR MYFORD LATHES
THE MEASUREMENT FROM THE BASE TO THE BASE OF THE TIP IS 47MM
PLEASE ENJOY, PLEASE COPY AND PASTE THE LINKS BELOW TO VIEW A SIMILAR ATTACHMENT BEING USED ....THE VIDEO IS COURTESY OF STEVE BEDAIR
http://www.youtube.com/watch?v=s_KRElCauTM
http://www.youtube.com/watch?v=f4pwUw0G3RQ

CLICK HERE FOR A LARGER PICTURE....>

Price: £28.75
Free UK Mainland Postage
(£34.50 Including VAT at 20%)

18PC PARALLEL SET ( 9PAIRS )
Ref: 21176688

A QUALITY PARALLEL SET ( 9 PAIRS IN TOTAL )
GROUND ON A 4 SIDES
SIZES:
1/4 X 3/4 X 6"
1/4 X 7/8 X 6"
1/4 X 1" X 6"
1/4 X 1 1/8" X 6"
1/4 X 1 1/4" X 6"
1/4 X 1 3/8" X 6"
1/4 X 1 1/2" X 6"
1/4 X 1 5/8" X 6"
1/4 X 1 3/4" X 6"
COMES COMPLETE IN FITTED WOODEN BOX
ACCURACY +/- 0.0003

Price: £41.25
Free UK Mainland Postage
(£49.50 Including VAT at 20%)

Toolmakers Multi use Vee Vice
Ref: 843903

Toolmakers Multi use Vee Vice
The Vice is 33mm x 33mm x 125mm long excluding the screw
Precision Hardened and Ground
Vice without removable jaw 75mm capacity and 13mm high.
Removablw jaw has a Horizontal and Vertical Vee,
Vee and clamp on reverse side will take a 35mm diameter.

More...

Price: £32.92
Free UK Mainland Postage
(£39.50 Including VAT at 20%)

VERTEX HEAVY DUTY DEMAGNETISER
Ref: 1608

VERTEX HEAVY DUTY DEMAGNETISER
240V SUPPLY
TO USE SIMPLY PLACE THE WORK NEAR THE CENTRE OF THE PLATE, CAN ALSO BE HELD ON, WHEN WORKING ON LARGE HARD TO MOVE OBJECTS
FULL INSTRUCTIONS ARE SUPPLIED

More...

Price: £63.50
Free UK Mainland Postage
(£76.20 Including VAT at 20%)

Precision Tee-Slotted Table + Tee Nuts
Ref: 987985

Precision Tee-Slotted Table + Tee Nuts
Close Grain Cast Iron
5" x 4" x 3/4"
Many uses for this plate in the workshop
You drill to suit its use
Can be used to mount rear toolposts/ milling tools etc

More...

Price: £20.83
Free UK Mainland Postage
(£25.00 Including VAT at 20%)

Boring / Drilling Table for Myford Lathe
Ref: 942093

Boring / Drilling Table for Myford Lathe
unit is 6 1/2" x 6 1/2 x 1"
Unit has 4 x myford sized
made as a boring / drilling table but has lots of other uses

Price: £49.17
Free UK Mainland Postage
(£59.00 Including VAT at 20%)

4 1/2" Tee Slotted Angle plate for the Myford Lathe
Ref: 9824932

4 1/2" Tee Slotted Angle plate for the Myford Lathe
made for the Myford Users but can be used on any Lathe or Milling machine
made from close grain cast iron
three Tslotts with 40mm centres
2 tnuts supplied to fix
unit is 4 1/2" high x 4" wide base x 2 1/2"
The base has 2 fixing slots 3/8" wide
unit fixes directly onto a Myford Cross slide or Vertical slide

More...

Price: £20.42
Free UK Mainland Postage
(£24.50 Including VAT at 20%)

9" T-Slotted Faceplate for Myford ML7/Super7
Ref: 210989

9" T-Slotted Faceplate for Myford ML7/Super7
This unit has 6x T-slots (unit comes supplied with 4 t nuts to get you going)
This unit is the same thread as the ML10 but due to the diameter will not fit
due to the weight this unit is only designed to be run at low speed
"NOW REDUCED IN PRICE"
More...

Price: £29.17
Free UK Mainland Postage
(£35.00 Including VAT at 20%)

10 1/2" FACEPLATE D1-3 FITTING
Ref: 9832D3

10 1/2" FACEPLATE D1-3 FITTING (ALSO KNOWN AS D3 FITTING)
TO FIT MACHINES SUCH AS HARRISON M250, COLCHESTER BANTAM/ CHIPMASTER
UNIT HAS 8 X 12MM X 60 SLOTS
CAMLOCK PIN DIAMETER 14MM
THIS UNIT INCLUDES THE PINS AND FIXING SCREWS

More...

Price: £65.83
Free UK Mainland Postage
(£79.00 Including VAT at 20%)

2" X 3" X 2" Small Precision Angle Plate
Ref: 2101

size 2" X 3" X 2"
Eclipse Style
Small Precision Angle Plate
smallest available
Traditional English Web Design
2 vertical slots 8mm x 30mm
2 horizontal slots 8mm x 45mm
Close grain Cast Iron construction
Precision Ground
Made only for Rdgtools
This size is very usefull when face plate work is required or on small milling machines

More...

Price: £11.67
Free UK Mainland Postage
(£14.00 Including VAT at 20%)

Universal Bevel Protractor (0-320 degrees)
Ref: 896910
Universal Bevel Protractor (0-320 degrees)
Used by Fabricators / Engineers when measuring and marking

A top quality Unit

<More...>

Price: £29.95
Free UK Mainland Postage
(£35.94 Including VAT at 20%)

MASTER THREAD REPAIR SET "METRIC" 5, 6, 8, 10 AND 12MM)
Ref: 293

MASTER METRIC THREAD REPAIR KIT
5MM X 0.8 ,6MM X 1.0 8MM X 1.25
10MM X 1.5,12MM X 1.75
USED TO REPLACE DAMAGED SCREW THREADS
ONE HSS TAP FOR EACH SIZE
ONE HSS DRILL FOR EACH SIZE
TWO INSERT TOOLS FOR EACH SIZE
THREAD INSERTS FOR EACH SIZE
COMES COMPLETE IN STEEL STORAGE BOX

More...

Price: £41.25
Free UK Mainland Postage
(£49.50 Including VAT at 20%)

4 Way Toolpost for a Boxford Lathe
Ref: 2092

4 Way Toolpost for a Boxford Lathe
All steel construction
8 square headed screws
size 75 x 75 x 45mm high
max tool capacity 18mm
this toolpost will fit directly onto a standard 4 1/2" boxford Lathe

More...

Price: £23.33
Free UK Mainland Postage
(£28.00 Including VAT at 20%)

200mm Diameter Backplate LO Taper (Colchester Studant etc)
Ref: 2089

200mm Diameter Backplate LO Taper (Colchester Studant etc)
This Backplate is the same LO Taper as the old round head Colchester Studant

More...

Price: £74.58
Free UK Mainland Postage
(£89.50 Including VAT at 20%)

200mm Diameter Backplate LOO Taper (Kerry / Harrison etc)
Ref: 2090

200mm Diameter Backplate LOO Taper (Colchester Studant etc)
This Backplate is the same LOO Taper as some of the Harrisons and Kerry Machines

More...

Price: £74.58
Free UK Mainland Postage
(£89.50 Including VAT at 20%)

"English Style" Tap Wrench 2 - 10mm
Ref: 2056

"English Style" Tap Wrench
2 - 10mm capacity
The diameter of the hole is 10mm
A quality design, Strong construction
More...

Price: £4.96
Free UK Mainland Postage
(£5.95 Including VAT at 20%)

Fixed Steady for Emco 3 & 4 Lathes
Ref: 890234

Fixed Steady for Emco 3 & 4 Lathes
Standard Cast Aluminium Casting
Brass support Arms
40mm max capacity
fixing plate and screw including
Half the normal price

More...

Price: £16.25
Free UK Mainland Postage
(£19.50 Including VAT at 20%)

Graduated Handwheel for Myford ML7 / Super 7
Ref: 2054

Graduated Handwheel for Myford ML7 / Super 7
graduated 0-125 on the scale (Imperial Graduations)
Does not come with pointer
This is a new product

More...

Price: £14.17
Free UK Mainland Postage
(£17.00 Including VAT at 20%)

SLITTING SAW ARBOUR R8 TAPER
Ref: 2058

SLITTING SAW ARBOUR R8 TAPER
TAKES ALL 1" , 7/8", 3/4", 5/8". BORE SLITTING SAWS
SAW IN PICTURE NOT INCLUDED

More...

Price: £12.50
Free UK Mainland Postage
(£15.00 Including VAT at 20%)

HEAVY DUTY NIBBLER 240V CUT UPTO 3MM
Ref: 98523

HEAVY DUTY NIBBLER 240V
WILL CUT UPTO 3MM STEEL OR 1.8MM STAINLESS
NO-LOAD SPEED 1000RPM
THIS IS THE STRONGEST NIBBLER I CAN FIND
COMES COMPLETE WITH STORAGE CASE

More...

Price: £96.30
Free UK Mainland Postage
(£115.56 Including VAT at 20%)

2mt Boxford Chuck Adaptor "For Rotary Tables"
Ref: 1902

2mt Boxford Chuck Adaptor "For Rotary Tables"
The end comes out and is used to secure the adaptor in the rotary table
A quality unit
More...

Price: £11.67
Free UK Mainland Postage
(£14.00 Including VAT at 20%)

2mt Lathe Drill Tapping Attachment
Ref: 88025

Lathe Drill Tapping Attachment
The attachment consists of a 13mm drill chucks and a parallel shaft
the sleeve is a 2mt with parallel bore
so the main body will slide in the sleeve and allow hand tapping
Very handy in the lathe when tapping small bores straight
More...

Price: £14.13
Free UK Mainland Postage
(£16.96 Including VAT at 20%)

75MM - 95MM Adjustable Tailstock
Ref: 1914

75MM - 95MM Adjustable Tailstock
Fits our 4" Tilting Rotary Table
fine feed centre point
All Cast construction with hardened tip

More...

Price: £30.00
Free UK Mainland Postage
(£36.00 Including VAT at 20%)

Digital Waterproof Caliper
Ref: 1719

Digital Waterproof Caliper
Metric/Imperial Conversion at the touch of a button
Large Clear Digits
Fitted Case
Completley Waterproof
Manual On/Off

More...

Price: £49.96
Free UK Mainland Postage
(£59.95 Including VAT at 20%)

50MM 3 PIN FIXED STEADY FOR PULTRA LATHE
Ref: 585798

50MM 3 PIN FIXED STEADY FOR PULTRA LATHE
THIS STEADY IS NEW AND UNUSED

More...

Price: £62.50
Free UK Mainland Postage
(£75.00 Including VAT at 20%)

70MM 3 PIN FIXED STEADY FOR PULTRA LATHE
Ref: 2195

70MM 3 PIN FIXED STEADY FOR PULTRA LATHE
THIS STEADY IS NEW AND UNUSED

More...

Price: £62.50
Free UK Mainland Postage
(£75.00 Including VAT at 20%)

NEW 3-POINT STEADY FOR COLCHESTER BANTAM LATHE
Ref: 625968

NEW 3-POINT STEADY FOR COLCHESTER BANTAM LATHE
NEW AND UNUSED
5-1/2" CENTRE HEIGHT
WILL FIT BOTH 800 AND 1600 MODELS.
MADE OF CAST ALUMINIUM
FROM COLCHESTER WOULD COST
OVER £300.00

CLICK HERE FOR A LARGER PICTURE

Price: £79.74
Free UK Mainland Postage
(£95.69 Including VAT at 20%)

RDG Tools Catalogue » New Lines To RDG Tools

New Lines To RDG Tools

Product sections

Address