This section is to help myford lathe users locate spare parts tooling and accesseries for MYFORD ML7and MYFORD SUPER 7 LATHES. We have tried to help myford users by putting all the relevent tooling together on one site,so if its here in our opion it will fit. On this site you will find repacement parts (new) parts second hand,myford sized tooling,and myford accessories. All parts are new unless stated other wise.

Myford series 7 manual Ref: 942

Author Ian Bradley

Pages 232

This book is a must for all myford owners.

this book covers:

1- The Myford ML7 Lathe

2- The Myford Super 7 & ML7-R Lathes

3- Installation

4- Lathe Tools

5- Sharpening Lathe Tools

6- Mounting Work in the Lathe

7 - General Turning , drilling and boring in the lathe

8-Threading & Screwcutting in the Lathe

9 - Milling in the Lathe

10- Gear Cutting in the Lathe

11-Taper Turning

12 - Repetition Work

13- Additional Fitments & Operations

14 - Maintenance

15 - A Two tool back toolpost

16 - Attachments for the back toolpost

17 - Design Changes

18 - Formulae for Gearing

19 - Tables for Threads

20 - Lubrication Charts.

a very good book for begineers

£10.95

ER32 COLLET CHUCK WITH MYFORD THREAD

Ref: 86340LK

Price: £42.13 (£49.50 Including VAT at 17.5%)

NEW HBM ER32 COLLET CHUCK FOR MYFORD LATHES

TAKES ER 32 COLLLETS

SCREWS STRAIGHT ON TO ML7,SUPER SEVEN LATHE

TAKES STANDARD ER32 COLLETS

MAKES SMALL WORK ON YOUR MYFORD A PLEASURE

Full set ER32 collets 18pc (2-20mm)

Ref: 666

Price: £70.21 (£82.50 Including VAT at 17.5%)

Full set ER32 collets

18pc (2-20mm and all imperial equivelent sizes)

these collets will hold both threaded and straight shank

complete in fitted wooden storage box

More...

ER25 COLLET CHUCK WITH MYFORD THREAD

Ref: 86340MYFa

Price: £42.13 (£49.50 Including VAT at 17.5%)

NEW HBM ER25 COLLET CHUCK FOR MYFORD LATHES

TAKES ER 25 COLLLETS

SCREWS STRAIGHT ON TO ML7,SUPER SEVEN LATHE

TAKES STANDARD ER25 COLLETS

MAKES SMALL WORK ON YOUR MYFORD

A PLEASURE

SET OF ER25 COLLETS (15 PIECE)

Ref: 125775

Price: £61.70 (£72.50 Including VAT at 17.5%)

A FULL SET OF ER25 COLLETS, 15 COLLETS IN THE SET, WILL HOLD WORK FROM 1.5MM TO 16MM.

THESE COLLETS WILL HOLD STRAIGHT SHANK AND THREADED SHANK END/SLOT MILL'S

A QUALITY SET

2MT REVOLVING BACKPLATE 100MM DIA

Ref: 92342335

Price: £15.74 (£18.49 Including VAT at 17.5%)

2MT REVOLVING BACKPLATE

100MM DIA

THESE ARE USED TO MOUNT 3 AND 4 JAW CHUCKS SO THEY CAN BE MOUNTED IN THE TAILSTOCK TO ALLOW MACHINING OF TUBE ON THE LATHE

SIMPLY RECESS THE BACKPLATE AND ATTACH THE CHUCK AS YOU WOULD TO FIT THE HEADSTOCK OF THE LATHE

More...

SMALL DIVIDING HEAD / INDEXING HEAD

Ref: 466246

Price: £127.32 (£149.60 Including VAT at 17.5%)

First this unit is a 24 hole indexing unit,with a 2-1/16" center hight,nose is threaded

same as myford lathe so will allow mounting of myford chucks and attachments.

Bore is 2mt and will allow center to center work with tailstock.

Base hole centers will allow mounting on myford vertical slide or cross slide.

Takes only seconds to add dividing attachment ,that will allow micro dividing to 1000th of a degree.

3 dividing plates included to give all prime numbers

2MT TEST BAR (extra long 11")

Ref: 8927

Price: £16.77 (£19.70 Including VAT at 17.5%)

HBM 2MT LATHE PARALLEL TEST BAR (11" long inc taper)

EVER WONDERED WHY YOU GET A SLIGHT

TAPER WHEN TURNING OVER A LONG DISTANCE.

ITS USUALLY BECAUSE YOUR TAILSTOCK IS NOT IN LINE.

TO ELIMINATE THIS THE TEST BAR FITS BETWEEN

YOUR HEAD STOCK -TAILSTOCK.

UNIT IS HARDENED AND GROUND PARALLEL

TO 0.0002" AND CENTERED AT BOTH ENDS.

SIMPLY PLACE BETWEEN CENTERS

SET UP DTI TO RUN ALONG LENGHT

RE-ALINE TAILSTOCK TO SUIT.

2MT TAPER AT ONE END

VERTEX COOLANT PUMP SET ( 24O VOLTS )

Ref: 899

Price: £97.87 (£115.00 Including VAT at 17.5%)

COMPLETE VERTEX COOLANT PUMP KIT

240 VOLTS

9 LTR TANK

COMPLETE UNIT FOR A LATHE OR MILLING MACHINE

ON/OFF SWITCH

COOLANT HOSE / DRAIN HOSE

FLEXABLE COOLANT HOSE

QUALITY KIT MADE BY VERTEX

More...

4 JAW INDEPENDENT CHUCK FOR MYFORD LATHE 150mm

Ref: 150mmbry2

Price: £67.66 (£79.50 Including VAT at 17.5%)

4 JAW INDEPENDENT CHUCK FOR MYFORD LATHE

HBM NEW SLIM BODY 150MM MODEL ONLY 45MM WIDE

SLIM BODY CHUCK IS NEEDED TO WORK WITHIN GAP OF MYFORD LATHE

INTERNAL THREADED TO FIT DIRICTLY ON MYFORD

ML7 & SUPER SEVEN LATHES

SO NO NEED FOR BACK PLATE

click here for a larger picture

HBM 100MM 3 JAW CHUCK THREADED FOR MYFORD LATHES

Ref: 810MY

Price: £67.66 (£79.50 Including VAT at 17.5%)

HBM 100MM 3 JAW LATHE CHUCK

THREADED FOR MYFORD LATHE ( NO BACKPLATE NEEDED )

READY TO FIT STRAIGHT ON YOUR MYFORD ML7 / SUPER SEVEN LATHE COMPLETE WITH REVERSE JAWS AND CHUCK KEY.

WHY PAY DOUBLE THE PRICE FROM OUR COMPETITORS?

CERTAINLY NOT WORTH BUYING SECONDHAND NOW.

MADE SOLEY FOR RDGTOOLS.

CLICK THE IMAGE FOR A VIEW OF THE BACK OF THIS CHUCK

HBM 125MM 4 JAW CHUCK THREADED FOR MYFORD LATHES

Ref: 812653my

Price: £67.66 (£79.50 Including VAT at 17.5%)

HBM 125MM 4 JAW LATHE CHUCK

THREADED FOR MYFORD LATHE ( NO BACKPLATE NEEDED )

READY TO FIT STRAIGHT ON YOUR MYFORD ML7 / SUPER SEVEN LATHE AND CHUCK KEY.

WHY PAY DOUBLE THE PRICE FROM OUR COMPETITORS?

CERTAINLY NOT WORTH BUYING SECONDHAND NOW.

MADE SOLEY FOR RDGTOOLS.

CLICK THE IMAGE FOR A VIEW OF THE BACK OF THIS CHUCK

HBM 45MM 4-JAW CHUCK WITH FITTED MYFORD NOSE THREAD

Ref: 82087MY

Price: £50.64 (£59.50 Including VAT at 17.5%)

HBM 45MM 4-JAW CHUCK WITH FITTED MYFORD NOSE THREAD.

FITS BOTH ML7 AND SUPER SEVEN LATHES.

SUPERB QUALITY.

CLICK HERE FOR A LARGER PICTURE

7" FACE PLATE FOR YOUR MYFORD LATHE

Ref: 9869687

Price: £25.11 (£29.50 Including VAT at 17.5%)

7" FACE PLATE

FITS BOTH ML7 AND SUPER 7 LATHES

HAS THE STANDARD MYFORD NOSE THREAD

9" FACE PLATE FOR YOUR MYFORD LATHE

Ref: 98696879

Price: £30.21 (£35.50 Including VAT at 17.5%)

9" FACE PLATE

FITS BOTH ML7 AND SUPER 7 LATHES

HAS THE STANDARD MYFORD NOSE THREAD

THIS IS THE LARGER FACEPLATE

4" CHUCK BACK PLATE TO FIT MYFORD

Ref: 11957

Price: £14.04 (£16.50 Including VAT at 17.5%)

4" Lathe chuck back plate to fit MYFORD ML7 and SUPER 7. Quality made.

5" CHUCK BACK PLATE TO FIT MYFORD

Ref: 11957G

Price: £14.04 (£16.50 Including VAT at 17.5%)

5" Lathe chuck back plate to fit MYFORD ML7 and SUPER 7. Quality British cnc made.

QUICK CHANGE TOOLPOST TO FIT MYFORD ( special offer )

OUT OF STOCK

Ref: 7253498T

Price: £51.06 (£60.00 Including VAT at 17.5%)

A Superb quick change toolpost to fit myford ML7 and SUPER 7 lathes, All parts are hardened and ground. Set of five pieces- the toolpost block, 2 standard holders, 1 parting holder and 1 vee holder for boring. Also comes complete with 2 alen headed spanners for adjustment of the post.

Main block 2 3/4 " square, 1 3/4" high with a 7/16" bore.

SPARE HOLDERS FOR QUICK CHANGE ( MYFORD SIZE )

OUT OF STOCK

Ref: 831

Price: £8.51 (£10.00 Including VAT at 17.5%)

SPARE HOLDER FOR QUICK CHANGE (3.1/2")

MYFORD SIZE

REAR TOOLPOST FOR MYFORD LATHES ( ROCKER TYPE )

OUT OF STOCK

Ref: 832MYR

Price: £33.62 (£39.50 Including VAT at 17.5%)

A REAR PARTING BLOCK FOR MYFORD ML7 SUPER 7 ETC (NOT 10 OR 4)

THE UNIT HAS A BOAT TYPE TOOL IN THE JAWS TO HELP OBTAIN CORRECT CENTRE HEIGHT.

THE UNIT HAS A T-NUT ON THE BOTTOM TO FIX DIRECT TO YOUR SLIDE.

CLICK HERE FOR A LARGER PICTURE

3-POINT STEADY FOR MYFORD LATHE

OUT OF STOCK

Ref: 009

Price: £29.79 (£35.00 Including VAT at 17.5%)

3-POINT STEADY FOR MYFORD LATHE ( ML7 AND SUPER7 )
CLICK HERE FOR A LARGER PICTURE

2-POINT STEADY FOR MYFORD ML7 / SUPER 7 LATHE

OUT OF STOCK

Ref: 008

Price: £16.60 (£19.51 Including VAT at 17.5%)

2-POINT STEADY FOR MYFORD ML7 / SUPER 7 LATHE. STOC'S ARE LOW SO BE QUICK!
CLICK HERE FOR A LARGER PICTURE

HBM 100MM ROTARY TABLE WITH MYFORD FIXING

Ref: 365100HBM

Price: £67.23 (£79.00 Including VAT at 17.5%)

HBM ROTARY TABLE

MADE FOR MYFORD LATHE USERS (SUPERB QUALITY)

100MM (4" DIA ) , 55MM HIGH

GRADUATED O-360 DEGREES

TWO LOCATING TEE SLOTS THAT FIT DIRECT ONTO MYFORD VERTICAL SLIDE BY INTERNAL TEE NUTS ( SUPPLIED )

ALSO INCLUDED MYFORD THREAD NOSE

LOCATES IN CENTRE HOLE AND SECURED WITH TEE-NUTS ( SUPPLIED )

THIS NOSE OPENS A WHOLE NEW WORLD TO MILLING ON YOUR LATHE

THIS UNIT CAN BE USED AS A NORMAL SMALL ROTARY TABLE ON YOUR MILL OR LATHE

BUT WHEN NEEDED IT CAN BE FITTED TO YOUR MYFORD VERTICAL SLIDE IN SECONDS

ONCE THE NOSE IS FITTED IT CAN HOLD 3-JAW CHUCK OR 4-JAW CHUCK AND FACE PLATE ALLOWING MILLING WORK NEVER KNOWN ON YOUR MYFORD LATHE

ONLY AVAILABLE FROM RDGTOOLS

SPECIFICATION

ONE 100 ROTARY TABLE ( WITH INTERNAL TEE NUTS )

THREADED NOSE 1-1/8" X 12 TPI ( MYFORD THREAD )

TEE NUTS AND SCREWS TO SECURE.

CLICK HERE FOR A LARGER PICTURE

VICE FOR VERTICAL SLIDE

Ref: 13128

Price: £25.11 (£29.50 Including VAT at 17.5%)

SMALL VICE FOR VERTICAL SLIDES

THERE IS A SMALL INSERT IN THE JAWS THAT HELP'S TO HOLD WORK THAT IS DIFFERENT SHAPES .THIS VICE HAS THE BOLT SLOTS HOLES TO FASTEN DIRECTLY ON TO A MYFORD VERTICAL SLIDE (BOTH STANDARD AND DOUBLE SWIVEL SLIDES)

ADAPTOR FOR MYFORD VERTICAL SLIDE ( NEW )

Ref: 98234723

Price: £12.34 (£14.50 Including VAT at 17.5%)

ADAPTOR FOR MYFORD VERTICAL SLIDE

STEEL ADAPTOR THREADED WITH MYFORD NOSE THREAD

SLIDES ON TEE SLOTS AND LOCKS ANYWERE

PEOPLE USUALY ONLY USE VERTICAL SLIDE WITH VISE

THIS ATTACHMENT ALLOW MANY MORE OPERATIONS ON YOUR LATHE

WILL EVEN FIT ON CROSS SLIDE

SALE IS FOR ADAPTOR ONLY NOT VERTICAL SLIDE OR MACHINE

Rotating tailstock turret 2 morse taper

OUT OF STOCK

Ref: 7099876

Price: £50.64 (£59.50 Including VAT at 17.5%)

A rotating tailstock turret

SOMETIMES KNOWN AS A QUAD HEAD

on a 2 morse taper shank perfect for the myford boxford user.

Comes complete with, 2 drill chucks and keys, 1 x 13/16" diestock holder and 1 x revolving centre.

All heads screw on to the turret so other attachments can be made to fit.

The head rotates simply by lifting a lever. How easy is that?!

normal price is £129.00

BUY NOW FOR ONLY £59.50

click here for a larger picture

CHANGE GEARS FOR MYFORD LATHES (20T - 39T)

Ref: 13153

GEARS FOR MYFORD LATHES

PLEASE CHOOSE FROM THE SELECTION OF CHANGEWHEELS FOR YOUR MYFORD LATHE,

PLEASE USE DROP DOWN MENU

ALL GEARS ARE 20DP, 5/8" BORE WITH A 1/8" KEYWAY

THESE PRICES ARE ONLY FOR A LIMITED TIME

CHANGE GEARS FOR MYFORD LATHES (40T - 127T)

Ref: 29

GEARS FOR MYFORD LATHES

PLEASE CHOOSE FROM THE SELECTION OF CHANGEWHEELS FOR YOUR MYFORD LATHE,

PLEASE USE DROP DOWN MENU

ALL GEARS ARE 20DP, 5/8" BORE WITH A 1/8" KEYWAY

THESE PRICES ARE ONLY FOR A LIMITED TIME

REAR PARTING SYSTEM FOR YOUR MYFORD LATHE

Ref: 637

Price: £59.15 (£69.50 Including VAT at 17.5%)

NEW REAR TOOL POST PARTING SYSTEM MADE ONLY TO FIT MYFORD ML7 ( WITH LONG CROSSLIDE ) AND SUPER 7 LATHES.

WITH THIS RIGID UNIT PARTING OFF IS EASY!

FIXES TO TWO REARMOST TEE SLOTS ON LONG CROSSLIDE.

FIXED READY TO USE BUT CLEAR OF NORMAL MACHINING ACTIVITIES.

ADJUSTABLE HEIGHT ADJUSTMENT WHICH IS PRE-SETTABLE.

IF YOU ALREADY HAVE A INTERCHANGABLE TOOL POST ON YOUR MYFORD YOU CAN USE THE TOOL HOLDERS ON THIS SYSTEM TO:

USE IN OTHER REAR OPERATIONS SUCH AS FACING AND CHAMFERING.

THIS UNIT IS ONLY AVAILABLE FROM RDGTOOLS AND WILL BE SOLD AT 1/2 NORMAL PRICE!

OR SEE OUR SITE AT:

WWW.RDGTOOLS.CO.UK

SET CONSISTS OF:

MOUNTING BLOCK WITH TEE BOLTS

PARTING BLADE HOLDER

HIGH SPEED BLADE WITH 3 DEGREES TOP RAKE

SPANNER AND 2 ALLAN KEYS

CLICK HERE FOR MORE DETAILS

DOUBLE SWIVEL VERTICAL SLIDE FOR MYFORD LATHE

Ref: 007

Price: £85.10 (£99.99 Including VAT at 17.5%)

A QUALITY DOUBLE SWIVEL SLIDE DESIGNED FOR A MYFORD ML7 / SUPER 7 LATHE. THIS IS A TOP QUALITY UNIT. SMALL STOCK AVAILABLE. PREVIOUSLY SOLD OUT QUICKLY!
CLICK HERE FOR A LARGER PICTURE

2MT TRIPLE BEARING REVOLVING CENTRE

Ref: 7862121D

Price: £16.60 (£19.51 Including VAT at 17.5%)

2MT TRIPLE BEARING REVOLVING CENTRE

THESE ARE DESIGNED FOR HEAVY USE

A QUALITY CENTRE

SET OF TAPS TO MAKE MYFORD TOOLING

Ref: 8675t

Price: £14.04 (£16.50 Including VAT at 17.5%)

FOR MAKING MYFORD BACK PLATES OR TOOLING

SIZE 1 1/8" X 12 BSW

CLICK HERE FOR A LARGER PICTURE

1 1/8" BSW SPLIT DIE ( FOR MYFORD NOSE THREAD )

Ref: 2357234S

Price: £12.34 (£14.50 Including VAT at 17.5%)

1 1/8" BSW SPLIT DIE,

THIS SPLIT DIE IS THE SAME THREAD AS A MYFORD SPINDLE NOSE

ONLY £14.50 WHILE STOCK LASTS

3" rotary table FITS ON MYFORD VERTICAL SLIDE

Ref: 605

Price: £42.13 (£49.50 Including VAT at 17.5%)

3" rotary table

Overall height of table is 1 5/8" ideal for the small mill.

Will also fit on myford vertical slide.

Use hozizontal / vertical.

Vertical centre hight 1-5/8".

Table in horizontal hight 1- 5/8".

HAND WHEEL CAN BE SET TO ZERO.

Hand wheel in 10 min divisions.

Bronze worm wheel and steel worm.

36:1 RATIO

Gear meshing to take up wear.

Revised model :

EXCLUSIVE TO RDG TOOLS

FITS ON MYFORD VERTICAL SLIDE ( CLICK ON PICTURE )

THIS TABLE IS MADE BY HBM TOOLS

CLICK HERE FOR A LARGER IMAGE

PAIR OF RAISING BLOCKS FOR MYFORD LATHE

Ref: 833

Price: £25.00 (£29.38 Including VAT at 17.5%)

PAIR OF RAISING BLOCKS FOR MYFORD LATHE IN NEW A1 CONDITION. THIS PAIR OF RAISING BLOCKS FIT UNDER ALL ML7/SUPER 7 MACHINES. THESE ARE VERY POPULAR AS THEY ARE MAINLY USED WITH A COOLANT TRAY. (can be used on own without tray)

NORMALLY £59.50 + VAT

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

Ref: 9

Price: £4.26 (£5.01 Including VAT at 17.5%)

PARTING BLADE FOR PRO LATHE PARTING SYSTEM

24MM HIGH X 6" LONG

CHANGE GEAR QUADRANT ASSEMBY

Ref: 11955

Price: £15.32 (£18.00 Including VAT at 17.5%)

A change gear quadrant assembly to fit myford ml7 and super 7 lathes,used in the gear train.

ADAPTOR FOR ROTARY TABLE 6" MYFORD THREAD

Ref: 823ADCHUCK456

Price: £12.72 (£14.95 Including VAT at 17.5%)

CHUCK ADAPTOR FOR ROTARY TABLE.

THREADED FOR MYFORD CHUCK.

ALLOWS A CHUCK WITH MYFORD THREAD TO BE FITTED TO A ROTARY TABLE.

CAN BE USED ON 6" VERTEX,6"SHOBA

AND OUR OWN 6" HMB ROTARY TABLE.

PLACE IN TAPER AND LOCK UNDER UNDER TABLE THEN SIMPLY SCREW ON MYFORD CHUCK.

competitor's price £25.00

RDG PRICE £14.95

CLICK HERE FOR A LARGER PICTURE

TEE BOLTS FOR MYFORD LATHE 1" LONG

Ref: 3275TEEW

Price: £4.21 (£4.95 Including VAT at 17.5%)

HBM TEE BOLTS FOR MYFORD LATHES

MADE ONLY FOR RDGTOOLS

SET OF 4

WILL SECURE WORK ON MYFORD CROSSLIDE AND VERTICAL SLIDE.

ALL 4 ARE 1" LONG

NOT WORTH MAKING YOURSELF

1-1/2" LENGTH ALSO AVAILABLE

TEE BOLTS FOR MYFORD LATHE 1 1/2" LONG

Ref: 3275TE11

Price: £4.21 (£4.95 Including VAT at 17.5%)

HBM TEE BOLTS FOR MYFORD LATHES

MADE ONLY FOR RDGTOOLS

SET OF 4

WILL SECURE WORK ON MYFORD CROSSLIDE AND VERTICAL SLIDE.

ALL 4 ARE 1 1/2" LONG

NOT WORTH MAKING YOURSELF

1" LENGTH ALSO AVAILABLE

TEE BOLTS FOR MYFORD LATHE 2" LONG

Ref: 32753

Price: £4.21 (£4.95 Including VAT at 17.5%)

HBM TEE BOLTS FOR MYFORD LATHES

MADE ONLY FOR RDGTOOLS

SET OF 4

WILL SECURE WORK ON MYFORD CROSSLIDE AND VERTICAL SLIDE.

ALL 4 ARE 2" LONG

NOT WORTH MAKING YOURSELF

1" LENGTH ALSO AVAILABLE

TOPSLIDE / CROSS SLIDE HANDLES FOR MYFORD LATHES

Ref: 875678HAND1

Price: £10.64 (£12.50 Including VAT at 17.5%)

TOPSLIDE/CROSSLIDE HANDLES FOR MYFORD LATHE.

NOT ORIGNAL MYFORD BUT ALSO NOT MYFORD PRICE!

FITS STRAIGHT ON TO SUPER7 LATHE.

IMPROVES THE LOOK OF YOUR LATHE FOR A SMALL COST.

SMALL ANGLE PLATE (MYFORD STYLE)

Ref: 12476

Price: £12.34 (£14.50 Including VAT at 17.5%)

A small precision angle plate ( MYFORD STYLE ) has 3 slots on one face and 2 slots on the other. Size - length 6" x 2 1/4" x 2/14" wide. Please note the shape, this is designed with myford lathes in mind. This is a perfect shape to attach onto a face plate. Please see supersize picture.
CLICK HERE FOR A LARGER PICTURE

KEATS ADJUSTABLE ANGLE PLATE

Ref: 210

Price: £20.85 (£24.50 Including VAT at 17.5%)

A NEW AND UNUSED KEATS ANGLE PLATE. USED CLAMPED ON LATHE FACE PLATE, THE KEATS INCORPORATES A DEEP VEE,SO THAT THE BORE IS TRUE. A MUST ATTACHMENT IF YOU ARE BORING CYLINDERS, OR MACHINING CRANK PINS. UNIT IS PRECISION GROUND ON ALL LOCATIONS. 2 HIGH TENSILE SCREWS CLAMP WORK, VEE WILL HOLD UP TO 1-3/4" DIA WORK, SIZE-4 3/4" LONG,3 3/4" HIGH,AND 1 3/4" WIDE, 2 X 13/4" SLOTS TO SECURE TO FACE PLATE. IDEAL SIZE FOR MYFORD LATHE.
CLICK HERE FOR A LARGER PICTURE

T-NUTS FOR MYFORD

Ref: 11963

Price: £3.83 (£4.50 Including VAT at 17.5%)

SET OF FOUR T-NUTS TO FIT MYFORD VERTICAL SLIDE OR T-SLOTTED CROSS SLIDE.

ITS NOT WORTH MAKING YOUR OWN FOR THIS PRICE!

TOOLPOST SPANNER 5/16" / 8MM SQUARE

Ref: 853

Price: £3.36 (£3.95 Including VAT at 17.5%)

LATHE TOOLPOST SPANNER

5/16" / 8mm square

Used on interchangeable toolposts.

FOUR-WAY TOOLPOST FOR MYFORD

Ref: 12010

Price: £15.75 (£18.51 Including VAT at 17.5%)

FOUR-WAY TOOLPOST FOR MYFORD ML7 AND SUPER 7 LATHES. BLOCK IS 2 3/4" X 2 3/4" X 1 3/8". CENTRAL BORE 7/16". TAKES TOOLS UP TO 1/2" SHANK. . BLOCK IS PRECISION GROUND.

THIS IS A QUALITY TOOLPOST.

3PC FLY CUTTER SET WITH HSS TOOL STEEL 1/2" SHANK

Ref: 3957k51

Price: £12.72 (£14.95 Including VAT at 17.5%)

3PC FLY CUTTER SET

1/2" SHANK

INCLUDES THE 3 PIECE OF TOOLSTEEL

IDEAL FOR FLY CUTTING ON A LATHE OR MILLING MACHINE

TAILSTOCK HANDWHEEL FOR MYFORD SUPER 7, ML7-R ETC

Ref: 11971

Price: £8.09 (£9.51 Including VAT at 17.5%)

TAILSTOCK HANDWHEEL FOR MYFORD SUPER 7, ML7-R ETC.

DIAMETER 4", BORE 1/2" WITH KEYWAY,. READY TO FIT STRAIGHT ON TO YOUR TAILSTOCK TO REPLACE THAT BROKEN OR DAMAGED HANDWHEEL. IMPROVE THE LOOK AND FEEL OF YOUR LATHE.

WOULD COST YOU ABOUT THREE TIMES THIS PRICE FROM MYFORD!

SADDLE HANDWHEEL FOR MYFORD ML7, SUPER 7, ML7-R ETC

Ref: 11970

Price: £8.09 (£9.51 Including VAT at 17.5%)

DIAMETER 3 1/2", BORE 7/16" WITH KEYWAY. READY TO FIT STRAIGHT ON TO YOUR LATHE APRON TO REPLACE THAT BROKEN OR DAMAGED HANDWHEEL. IMPROVE THE LOOK AND FEEL OF YOUR LATHE.

WOULD COST YOU ABOUT THREE TIMES THIS PRICE FROM MYFORD,

NEW PRO LATHE PARTING SYSTEM

Ref: 1212

Price: £20.85 (£24.50 Including VAT at 17.5%)

A NEW PROFESSIONAL LATHE PARTING SYSTEM. VERY RIGID CONSTRUCTION AND EASY TO OPERATE. THIS IS THE SAME CONSTRUCTION AS INDEXABLE SYSTEM SOLD BY SANDVIK BUT INCORPORATING A HSS BLADE INSTEAD OF A INDEXABLE PARTING TIP,SO LESS EXPENSIVE TO OPERATE. ON SMALL-MEDIUM LATHE THE SANDVIK HOLDER WOULD NOT FIT BECAUSE THE SUPPORT WAS TO THICK TO FIT IN THEIR TOOL POSTS. THIS ONE IS ONLY 1/2" WIDE SO WILL FIT MOST LATHES. BLADE SLIDES VERY EASILY BY LOOSENING 3 SCREW ON TOP. BLADE CLAMPING FORCE IS EXCELLENT. UNIT ( NOT BLADE) IS 3 3/8" LONG AND 1 3/4" HIGH. BLADE IS 1" WIDE AND 6" LONG.

THIS UNIT IS MADE FOR LATHE WITH A MIN CENTRE HEIGHT OF 4 1/2" SUCH AS BOXFORD, STUDANT, M300 ECT. WILL FIT MYFORD AND WILL FIT IN TOOLPOST BUT YOU WILL HAVE REDUCE END OF BLADE. I USE THIS SYSTEM ON MY LATHE. QUALITY MADE ( GUARANTEED ), YOU WONT BE DISAPPOINTED WITH THIS SYSTEM. EXTRA BLADES ARE ALWAYS AVAILABLE.
click here for more details

SWAN NECK FACE PLATE CLAMPS

Ref: 157TY

Price: £2.13 (£2.50 Including VAT at 17.5%)

SWAN NECK FACE PLATE CLAMPS

ALL NEW AND MADE ONLY FOR RGDTOOLS

DROP FORDGED WITH LIFE TIME GUARANTEE

VERY STRONG MATERIAL

USED ON LATHE FACE PLATES AND TO SECURE WORK ON MILLING TABLE

SIZE: 2-1/2" LONG

3/4" WIDE

PRICE IS FOR ONE BUT BUY AS MANY AS YOU REQUIRE

PRICE IS FOR ONE BUT BUY AS MANY AS YOU LIKE

SET OF METRIC AND WHITWORTH THREAD GAUGES

Ref: 4056

Price: £5.06 (£5.95 Including VAT at 17.5%)

A THREAD GAUGE THAT COVERS BOTH METRIC AND WHITWORTH (BSW) THREADS

A NICE LITTLE SET, PERFECT FOR THE TOP POCKET

TWO MORSE TAPER BLANK END ARBOR (MYFORD)

Ref: 11997

Price: £3.36 (£3.95 Including VAT at 17.5%)

TWO MORSE TAPER BLANK END ARBOR WITH 3/8" x 16TPI THREAD TO TAKE A DRAWBAR. OVERALL LENGTH 102mm. END IS 28mm DIAMETER x 30mm LONG. TAPER SHANK IS HARDENED, END IS SOFT TO ALLOW MACHINING. CAN BE USED TO MAKE END MILL HOLDER, DRILL ARBOR, THREADED ARBOR OR MANY OTHER APPLICATIONS. IDEAL FOR MYFORD OWNERS.

TAILSTOCK DIE HOLDER SET WITH A 2MT SHANK (DELUXE)

Ref: 94

Price: £29.79 (£35.00 Including VAT at 17.5%)

TAILSTOCK DIE HOLDER SET WITH A TWO MORSE TAPER SHANK TO FIT MYFORD ML7, SUPER 7, BOXFORD ETC.

SET COMPRISES A TWO MORSE TAPER SHANK AND FOUR SIZES OF DIE HOLDER (13/16", 1", 1 5/16" AND 1 1/2"). HOLDERS ARE HELD ON THE SHANK BY A PIN WHICH LOCATES IN SLOTS ON EITHER SIDE OF THE HOLDER ALLOWING ABOUT 1 1/2" OF TRAVEL (SET INCLUDES A PUNCH FOR REMOVING THE PIN). THIS IS A NICE SET
CLICK HERE FOR A LARGER PICTURE

2 MORSE TAPER TAILSTOCK DIE HOLDER

Ref: 354555

Price: £20.85 (£24.50 Including VAT at 17.5%)

UNIT WILL HOLD 4 DIFFERENT SIZES OF DIES,

SIZES IT WILL HOLD ARE 13/16", 1", 15/16", 1 1/2"

THE HEAD SLIDES UP AND DOWN ON THE SHAFT

PERFECT FOR THREADING ON ANY MACHINE WITH A 2 MORSE TAPER TAILSTOCK

2 MORSE TAPER COLLETS (FULL SET) imperial

Ref: 5161

Price: £38.30 (£45.00 Including VAT at 17.5%)

A FULL SET OF 2 MORSE TAPER COLLETS (7 COLLETS IN TOTAL). ALL COLLETS ARE NEW AND UNUSED. SIZES: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". COLLETS COME COMPLETE IN FITTED WOODEN STORAGE BOX AND CAN BE USED IN MILLING AND TURNING. WILL FIT THE HEADSTOCK OF A MYFORD LATHE ALL YOU NEED IS A LENGTH OF 3/8 BSW THREADED BAR TO PULL THE COLLET TIGHT INTO THE HEAD. THESE COLLETS WILL FIT ALL 2 MORSE TAPER MACHINES.
CLICK HERE FOR A LARGER PICTURE

2 MORSE TAPER COLLETS (FULL SET) METRIC

Ref: 6

Price: £38.30 (£45.00 Including VAT at 17.5%)

A FULL SET OF 2 MORSE TAPER COLLETS (8 COLLETS IN TOTAL)

ALL COLLETS ARE NEW AND UNUSED. SIZES: 2MM 3MM 5MM 6MM 8MM 10MM 11MM 12MM. COLLETS COME COMPLETE IN FITTED WOODEN STORAGE BOX AND CAN BE USED IN MILLING AND TURNING. WILL FIT THE HEADSTOCK OF A MYFORD LATHE. ALL YOU NEED IS A LENGTH OF 3/8 BSW THREADED BAR TO PULL THE COLLET TIGHT INTO THE HEAD. THESE COLLETS WILL FIT ALL 2 MORSE TAPER MACHINES.
CLICK HERE FOR A LARGER PICTURE

SLITTING SAW ARBOR ON TWO MORSE TAPER SHANK

Ref: 11969

Price: £10.64 (£12.50 Including VAT at 17.5%)

SLITTING SAW ARBOR ON TWO MORSE TAPER SHANK. THE CENTRAL SECTION IS MADE OF SEVERAL SPRUNG TUBES WHICH TELESCOPE INSIDE EACH OTHER ALLOWING SLITTING SAWS WITH VARIOUS SIZED BORES TO BE HELD. BORE SIZES ARE 1/2", 5/8", 3/4", 7/8" AND 1". THIS IS A NICE ARBOR TO FIT MYFORD AND MANY OTHER SMALL LATHES, DRILLS ETC. PLEASE NOTE THE SLITTING SAW SHOWN IS NOT INCLUDED IN THE SALE AND IS FOR ILLUSTRATIVE PURPOSES ONLY.

MORSE TAPER SLEEVES

Ref: 12473

MT SLEEVES

MORSE TAPER SLEEVES

PLEASE CHOOSE THE SIZE YOU NEED FROM THE DROP DOWN MENU BELOW

2-1, 3-1 AND 3-2 MORSE TAPERS INCLUDED

2 MORSE TAPER CENTER (DEAD/SOLID)

Ref: 12042

Price: £3.83 (£4.50 Including VAT at 17.5%)

2 MORSE TAPER DEAD CENTER. PERFECTLY GROUND ON ALL FACES. PERFECT FOR THE MYFORD/BOXFORD OWNER. USED IN THE TAILSTOCK/HEADSTOCK.

DELUX MAGNETIC BASE WITH COOLANT GUARD

Ref: 13497

Price: £24.26 (£28.51 Including VAT at 17.5%)

DELUX MAGNETIC BASE WITH COOLANT GUARD.

NEW LINE AVAILABLE ONLY TO RDGTOOLS.

THIS UNIT CONSISTS OF A DELUX MAGNETIC BASE WITH RIGID BALL JOINT MOVEMENT AND A REMOVABLE PERPEX COOLANT GUARD.

15" X 10"AND 1/8" THICK

SO UNIT CAN BE USED AS A NORMAL MAGNETIC BASE.

ONCE GUARD IS REQUIRED UNIT CAN BE FITTED IN SECONDS.

VERY HANDY ON MILLING MACHINE WHEN USING COOLANT.

SURFACE PLATE NOT INCLUDED IN SALE.

HALF DEAD CENTRE ON TWO MORSE TAPER (MYFORD)

Ref: 12007

Price: £3.40 (£4.00 Including VAT at 17.5%)

HALF DEAD CENTRE ON TWO MORSE TAPER TO FIT MYFORD ETC. THIS IS A QUALITY CENTRE, PRECISION GROUND AND HARDENED, IDEAL FOR GETTING IN CLOSE TO THE CENTRE AND FOR GRINDING WORK.

ADJUSTABLE MAGNETIC COOLANT KIT

Ref: 11968

Price: £10.64 (£12.50 Including VAT at 17.5%)

ADJUSTABLE MAGNETIC COOLANT KIT, MADE BY VERTEX. THIS IS SUITABLE FOR COOLING/LUBRICATING IN THE MACHINING PROCESS. THERE IS A TAPERED PIPE FITTING THAT CAN BE CONECTED VIA YOUR REMAINING COOLANT SYSTEM. THE BASE HAS A VERY STRONG MAGNET SO THAT YOU CAN DIRECT YOUR COOLANT/OIL ANYWERE ON THE MACHINE. THE LENGTH OF THE FLEXIBLE COOLANT PIPE IS 9" (extra flexi pipe can be orderd at extra cost)

SET OF BA THREAD GAUGES ( 0-10BA )

Ref: 4062

Price: £3.83 (£4.50 Including VAT at 17.5%)

SET OF BA THREAD GAUGES ( 0-10BA )

MADE FROM QUALITY STEEL, PERFECT FOR THE TOP POCKET

RDGTOOLS CATALOGUE | MYFORD LATHE USER'S PAGE

Email us at rdgtools@aol.com