3 MORSE TAPER FLY CUTTER, NEW AND UNUSED, TAKES UPTO 3/8" TOOL STEEL, HEAD DIAMETER 38X49MM, QUALITY ITEM, PLEASE SEE PICTURES, THREADED SHANK FOR DRAWBAR, USED IN MILLING MACHINES

SLITTING SAW ARBOUR 3 MORSE TAPER

Ref: 711F

Price: £8.47 (£9.95 Including VAT at 17.5%)

SLITTING SAW ARBOUR 3 MORSE TAPER

TAKES ALL 1" , 7/8", 3/4", 5/8". BORE SLITTING SAWS

SAW IN PICTURE NOT INCLUDED

3MT TEST BAR

Ref: 892793D3

Price: £16.98 (£19.95 Including VAT at 17.5%)

HBM 3MT LATHE PARALLEL TEST BAR

EVER WONDERED WHY YOU GET A SLIGHT

TAPER WHEN TURNING OVER A LONG DISTANCE.

ITS USUALLY BECAUSE YOUR TAILSTOCK IS NOT IN LINE.

TO ELIMINATE THIS THE TEST BAR FITS BETWEEN

YOUR HEAD STOCK -TAILSTOCK.

UNIT IS HARDENED AND GROUND PARALLEL

TO 0.0002" AND CENTERED AT BOTH ENDS.

SIMPLY PLACE BETWEEN CENTERS

SET UP DTI TO RUN ALONG LENGHT

RE-ALINE TAILSTOCK TO SUIT.

2MT TAPER AT ONE END

TAILSTOCK DIE HOLDER SET WITH A 3MT SHANK (DELUXE)

Ref: 96H

Price: £29.79 (£35.00 Including VAT at 17.5%)

TAILSTOCK DIE HOLDER SET WITH A THREE MORSE TAPER SHANK TO FIT VICEROY, COLCHESTER BANTAM/CHIPMASTER ETC. SET COMPRISES A THREE MORSE TAPER SHANK AND FOUR SIZES OF DIE HOLDER (13/16", 1", 1 5/16" AND 1 1/2"). HOLDERS ARE HELD ON THE SHANK BY A PIN WHICH LOCATES IN SLOTS ON EITHER SIDE OF THE HOLDER ALLOWING ABOUT 1 1/2" OF TRAVEL (SET INCLUDES A PUNCH FOR REMOVING THE PIN). THIS IS A NICE SET
<More...>

3 MORSE TAPER TRIPLE BEARING REVOLVING CENTRE

Ref: 880R

Price: £17.50 (£20.56 Including VAT at 17.5%)

REVOLVING CENTRE ON A NUMBER 3 MORSE TAPER

THIS UNIT HAS A TRIPLE BEARING IN THE HEAD FOR EXTRA STRENGHT AND LONG LIFE

THIS IS A QUALITY CENTRE

3 MORSE TAPER DRILL CHUCK ARBOUR'S

Ref: 12658

3MT DRILL ARBOURS

PLEASE CHOOSE FROM THE DROP DOWN MENU BELOW

3 MORSE TAPER DRILL CHUCK ARBOUR'S, THERE ARE MANY SIZES TO CHOOSE FROM,

PLEASE USE THE DROP DOWN MENU SUPPLIED BELOW

3 MORSE TAPER CENTER (DEAD/SOLID)

Ref: 12885

Price: £3.83 (£4.50 Including VAT at 17.5%)

3 MORSE TAPER DEAD CENTER, PERFECTLY GROUND ON ALL FACES, , USED IN THE TAILSTOCK/HEADSTOCK

3 MORSE TAPER BLANK END ARBOR 3/8"x16 DRAWBAR THREAD

Ref: 12233

Price: £3.83 (£4.50 Including VAT at 17.5%)

THREE MORSE TAPER BLANK END ARBOR WITH 3/8" x 16TPI THREAD TO TAKE A DRAWBAR. OVERALL LENGTH 118mm, END IS 22mm DIAMETER x 30mm LONG. TAPER SHANK IS HARDENED, END IS SOFT TO ALLOW MACHINING. CAN BE USED TO MAKE END MILL HOLDER, DRILL ARBOR, THREADED ARBOR OR MANY OTHER APPLICATIONS, IDEAL FOR BOXFORD AND MANY OTHER MACHINES

3-2 MORSE TAPER SLEEVE

Ref: 12237

Price: £3.83 (£4.50 Including VAT at 17.5%)

3 - 2 MORSE TAPER SLEEVE, HARDENED AND GROUND THROUGHOUT. WILL FIT BANTAM, CHIPMASTER, HARRISON, AND MANY OTHER MACHINES

3-1 MORSE TAPER SLEEVE

Ref: 12657

Price: £3.83 (£4.50 Including VAT at 17.5%)

3 - 1 MORSE TAPER SLEEVE, HARDENED AND GROUND THROUGHOUT. WILL FIT BANTAM, CHIPMASTER, HARRISON, AND MANY OTHER MACHINES

3 MORSE TAPER BORING HEAD

Ref: 12232

Price: £33.62 (£39.50 Including VAT at 17.5%)

BORING AND FACING HEAD ON 3 MORSE TAPER TO FIT BOXFORD, VICEROY AND RAGLAN LATHES AND LOTS OF DRILLING AND MILLING MACHINES. LENGTH 6 1/4", HEAD DIAMETER 2", MICRO-ADJUSTMENT GIVES A FEED OF 0.001" ON DIAMETER PER DIVISION. TAKES 1/2" BORING BARS EITHER PARALLEL OR PERPENDICULAR TO AXIS (NOT INCLUDED). THIS IS A NICE LITTLE BORING HEAD, BRAND NEW IN BOX WITH TWO ALLEN KEYS

BORING HEAD 3 MT WITH 12PC BRAZED BORING TOOL SET

Ref: 712

Price: £45.95 (£53.99 Including VAT at 17.5%)

BORING HEAD 2" DIA,3MT TAPER,COMES COMPLETE WITH A 12PC SET OF 1/2" BORING TOOLS,BORING HEAD HAS REMOVABLE SHANK AND CAN BE REPLACED WITH EITHER 2MT OR R8 SHANK (NOT INCLUDED)THREADED FOR DRAW BAR 3/8" BSW.,ADJUSTABLE IN 0,001" GRADUATIONS.

RDGTOOLS CATALOGUE | TAPER TOOLING 1MT, 2MT, 3MT, R8, 30INT. | 3MT-TOOLING

Email us at rdgtools@aol.com