2MT REVOLVING BACKPLATE 100MM DIA 2MT REVOLVING BACKPLATE 100MM DIA THESE ARE USED TO MOUNT 3 AND 4 JAW CHUCKS SO THEY CAN BE MOUNTED IN THE TAILSTOCK TO ALLOW MACHINING OF TUBE ON THE LATHE SIMPLY RECESS THE BACKPLATE AND ATTACH THE CHUCK AS YOU WOULD TO FIT THE HEADSTOCK OF THE LATHE More... |
 |
TWO MORSE TAPER BLANK END ARBOR (MYFORD) TWO MORSE TAPER BLANK END ARBOR WITH 3/8" x 16TPI THREAD TO TAKE A DRAWBAR. OVERALL LENGTH 102mm, END IS 28mm DIAMETER x 30mm LONG. TAPER SHANK IS HARDENED, END IS SOFT TO ALLOW MACHINING. CAN BE USED TO MAKE END MILL HOLDER, DRILL ARBOR, THREADED ARBOR OR MANY OTHER APPLICATIONS, IDEAL FOR MYFORD OWNERS
|
|
|
|
2 MORSE TAPER REVOLVING CENTRE REVOLVING CENTRE ON A TWO MORSE. LENGTH 136mm, 60 DEGREE CENTRE HAS A MAXIMUM DIAMETER OF 18mm. THIS IS A NICE CENTRE
|
|
2MT REVOLVING TUBE CENTRE 26-50MM A 3MT REVOLVING TUBE CENTRE CAPPACITY 26-50MM THESE CENTRES ARE USED WHEN YOU NEED TO SPIN LARGE DIA OF PIPE OF HOLLOW WORK THE HEAD REVOLVES CLICK HERE FOR A LARGER PICTURE |
|
2MT TRIPLE BEARING REVOLVING CENTRE 2MT TRIPLE BEARING REVOLVING CENTRE THESE ARE DESIGNED FOR HEAVY USE A QUALITY CENTRE |
|
2MT TEST BAR (extra long 11") HBM 2MT LATHE PARALLEL TEST BAR (11" long inc taper) EVER WONDERED WHY YOU GET A SLIGHT TAPER WHEN TURNING OVER A LONG DISTANCE. ITS USUALLY BECAUSE YOUR TAILSTOCK IS NOT IN LINE. TO ELIMINATE THIS THE TEST BAR FITS BETWEEN YOUR HEAD STOCK -TAILSTOCK. UNIT IS HARDENED AND GROUND PARALLEL TO 0.0002" AND CENTERED AT BOTH ENDS. SIMPLY PLACE BETWEEN CENTERS SET UP DTI TO RUN ALONG LENGHT RE-ALINE TAILSTOCK TO SUIT. 2MT TAPER AT ONE END |
|
Rotating tailstock turret 2 morse taper OUT OF STOCK Ref: 96308
Price: £50.64 (£59.50 Including VAT at 17.5%)
A rotating tailstock turret SOMETIMES KNOWN AS A QUAD HEAD on a 2 morse taper shank perfect for the myford boxford user comes complete with, 2 drill chucks and keys, 1 x 13/16" diestock holder and 1 x revolving centre all heads screw on to the turret so other attachments can be made to fit the head rotates simply by lifting a lever, how easy is that normal price is £129.00 |
|
2MT FLY CUTTER TAKES UPTO 1/4" TOOL STEEL, HEAD DIAMETER 1- 1/2", THREADED SHANK FOR DRAWBAR USED IN MILLING MACHINES AND LATHES IDEAL SIZE AND TAPER FOR MYFORD LATHE HEADSTOCK . |
|
|
|
2 MORSE TAPER COLLETS (FULL SET) METRIC A FULL SET OF 2 MORSE TAPER COLLETS, (8 COLLETS IN TOTAL) ALL COLLETS ARE NEW AND UNUSED, SIZES: 2MM 3MM 5MM 6MM 8MM 10MM 11MM 12MM, COLLETS COME COMPLETE IN FITTED WOODEN STORAGE BOX, CAN BE USED IN MILLING AND TURNING. WILL FIT THE HEADSTOCK OF A MYFORD LATHE ALL YOU NEED IS A LENGHT OF 3/8 BSW THREADED BAR TO PULL THE COLLET TIGHT INTO THE HEAD. THESE COLLETS WILL FIT ALL 2 MORSE TAPER MACHINE'S |
|
2 MORSE TAPER CENTER (DEAD/SOLID) 2 MORSE TAPER DEAD CENTER, PERFECTLY GROUND ON ALL FACES, PERFECT FOR THE MYFORD/BOXFORD OWNER, USED IN THE TAILSTOCK/HEADSTOCK
|
|
HALF DEAD CENTRE ON TWO MORSE TAPER (MYFORD) HALF DEAD CENTRE ON TWO MORSE TAPER TO FIT MYFORD ETC. THIS ISA QUALITY CENTRE, PRECISION GROUND AND HARDENED, IDEAL FOR GETTING IN CLOSE TO THE CENTRE AND FOR GRINDING WORK.
|
|
|
|
2 MORSE TAPER DRILL CHUCK ARBOURS 2 MORSE TAPER DRILL CHUCK ARBOURS, PLEASE CHOOSE SIZE FROM DROP DOWN MENU BELOW |
|
MORSE TAPER SLEEVES PLEASE CHOOSE THE SIZE YOU NEED FROM THE DROP DOWN MENU BELOW 2-1, 3-1 AND 3-2 MORSE TAPERS INCLUDED |
|
SLITTING SAW ARBOR ON TWO MORSE TAPER SHANK SLITTING SAW ARBOR ON TWO MORSE TAPER SHANK. THE CENTRALSECTION IS MADE OF SEVERAL SPRUNG TUBES WHICH TELESCOPE INSIDE EACH OTHER ALLOWING SLITTING SAWS WITH VARIOUS SIZED BORES TO BE HELD. BORE SIZES ARE 1/2", 5/8", 3/4", 7/8" AND 1", THIS IS A NICE ARBOR TO FIT MYFORD AND MANY OTHER SMALL LATHES, DRILLS ETC,PLEASE NOTE THE SLITTING SAW SHOWN IS NOT INCLUDED IN THE SALE AND IS FOR ILLUSTRATIVE PURPOSES ONLY
|
|
MAGNIFYING EQUIPMENT NETQUOTEVAR:LINK |
|
 |
|
